377 / 1618
2/123
Articles marked ◊ are not held in stock, procurement is effected at short notice.
Cutting Tools
2
Saw blade quality:
HCS:
High carbon steel for use in softer materials such as wood,
wood fibre boards and plastics.
Tooth design:
Teeth ground, side clearance side set.
Blade for clean, fast cuts in
wood and plastic.
Tooth pitch:
Large tooth pitch for coarser cuts coupled with fast work progress in
soft and/or thick material such as wood and plastic.
Application:
Saw blades are subject to high mechanical
and thermal loads. For this reason, the use
of specific coolants, e.g. cutting oil (for steel,
metals) or water (for aluminium, INOX, thin
sheets), is recommended in order to extend
the wear-resistance of the saw blade.
Design: 5 pieces in PVC pouch, (exception: 2748, 25 piece)
Suitable for:
All saber, reciprocal and tiger saws with standard shank.
Order
No.
Bosch No.
2744
2746
2748
Total
length
mm
Material Rough wood,
nail-free
mm
Construction
timber
mm
Boards
mm
Wooden
panel
cutout
mm
Green
wood,
pruning
mm
Plastics,
epoxy
mm
Tooth
pitch
mm
Type
of
tooth
0007
S 2345 X –
20.20
–
200 HCS
–
< 150 6–60 < 150
– < 150 2.5–4.3/
6–10
side set;
ground
0010
S 644 D 11.25 12.90 58.20 *
150 HCS
–
< 100 6–60 < 100
– < 100 4.3 side set;
ground
0020
S 1531 L 17.60 20.30 90.90 *
240 HCS < 190
–
–
–
< 190 –
5.0 side set;
ground
(W248)
(W247)
(W247)
Sabre saw blades for wood
* 25 pieces.
2746 0007
For timber (< 150 mm), boards: chipboard, MDF (6–60 mm), plywood,
plastic (< 150 mm), wooden wall (< 150 mm). Effortless fine cut.
2744/46/48 0010
For timber, wooden walls, boards: chipboard, MDF,
plywood, plastic, specially designed for plunge cuts.
2744/46/48 0020
For rough wood, nail-free, green wood, pruning, firewood.
Sabre saw blade
Saw blade quality:
HCS:
High carbon steel for use in softer materials such as wood,
wood fibre boards and plastics.
Bimetal:
Highly flexible, almost non-breakable combination of HSC
and HSS, long service life. Can be used for hard woods, abrasive
wooden materials, hard plastic, non-ferrous metals and metals.
Carbide-tipped:
The HSC blade is equipped with carbide teeth and
is thus suitable for abrasive materials such as glass-fibre-reinforced
plastics, asbestos cement, hard woods and aerated concrete.
Tooth design:
Teeth milled, side clearance side set:
Blade with relatively coarse
cut and fast work progress in hard and soft wood, aluminium,
plastics and non-ferrous metals.
Teeth milled, clearance wavy set:
Blade with fine result for straight
cuts in plywood, soft steel, aluminium, non-ferrous metals and
plastics.
Teeth ground, side clearance side set:
Blade for clean, fast cuts in
wood.
Teeth ground, side clearance lead angle ground:
Blade with taper
ground back for side clearance; for precise, fine and clean cuts in
wood and plastic.
Tooth pitch:
Small tooth pitch for fine cuts with slower work progress, in hard
and/or thin material such as metals and non-ferrous metals.
Large tooth pitch for coarser cuts coupled with fast work progress in
soft and/or thick material such as wood and plastic.
Application:
Saw blades are subject to high mechanical and thermal loads.
For this reason, the use of specific coolants, e.g. cutting oil (for steel,
metals) or water (for aluminium, INOX, thin sheets), is recommended
in order to extend the wear-resistance of the saw blade.
Saw blade quality:
Carbide-tipped:
The HSC blade is equipped with carbide teeth and
is thus suitable for abrasive materials such as glass-fibre-reinforced
plastics, asbestos cement, hard woods and aerated concrete.
Tooth design:
Teeth ground, side clearance side set.
Blade for clean, fast cuts in
wood and plastic.
Application:
Saw blades are subject to high mechanical and
thermal loads. For this reason, the use of specific
coolants, e.g. cutting oil (for steel, metals) or water (for aluminium,
INOX, thin sheets), is recommended in order to extend the wear-
resistance of the saw blade.
Design: 2 pieces in PVC pouch.
Suitable for:
All saber, reciprocal and tiger saws with standard shank.
Order
No.
Bosch No.
2746
Total
length
mm
Material Fiber
cement
mm
Porous concrete
(aerated concrete) PB2, PP2
mm
Red
brick
mm
GRP,
Epoxy
mm
INOX steel
sheets
mm
Stainless
steel profiles
mm
Type
of
tooth
0140
S 1130 RIFF
16.60
225 Carbide –
–
< 175 < 175 –
–
coated
0130
S 1141 HM
33.90
225 Carbide < 175
< 175
< 175 < 150 –
–
side set;
ground
(W247)
Sabre saw blades for special applications
2746 0140
For cast steel pipes, brick (red), GRP/epoxy.
2746 0130
For aerated concrete, brick (red), fibre cement,
GRP/epoxy, for abrasive materials.
Reciprocating saw blade
377