375 / 1618
2/121
Articles marked ◊ are not held in stock, procurement is effected at short notice.
Cutting Tools
2
Saw blade quality:
HSS:
Fully hardened high-speed steel for use in harder materials such
as metal, aluminium and non-ferrous metals.
Bimetal:
Highly flexible, almost non-breakable combination of HSC
and HSS, long service life. Can be used for hard woods, abrasive
wooden materials, hard plastic, non-ferrous metals and metals.
Tooth design:
Side clearance wavy set. Blade with fine result for straight cuts in soft
steel, aluminium, non-ferrous metals and plastics.
Tooth pitch:
Small tooth pitch for fine cuts with slower work progress, in hard and/
or thin material such as metals and non-ferrous metals.
Application:
Saw blades are subject to high mechanical and
thermal loads. For this reason, the use of specific
coolants, e.g. cutting oil (for steel, metals), is
recommended in order to extend the wear-
resistance of the saw blade.
Design: 5 pieces on card.
Suitable for:
Bosch, AEG, Milwaukee, DeWalt, ELU, Festool, Hitachi,
Mafell, Makita, Metabo, Protool.
Order
No.
Bosch No.
2735
2736
Cutting length
mm
Material
Metal
mm
Aluminium
mm
Plastic
mm
Tooth pitch
mm
Type of
tooth
Use
0055
T 118 G
5.95
6.85
67
HSS 0.5– 1.5 –
–
0.7 Milled,
wavy set
For very thin material, straight cuts.
0060
T 118 A
5.95
6.85
67
HSS 1 – 3
–
– progressive
1.1–1.5
Milled,
wavy set
For thin material, straight cuts, with plunge tip.
0065
T 218 A
7.60
8.80
67
HSS 1 – 3
–
– progressive
1.1–1.5
Milled,
wavy set
For thin metal sheets, especially for
curved cuts, with plunge tip.
0066
T 118 EOF
–
11.40
57 Bimetal 1.5– 4
–
–
1.5 Milled,
wavy set
For curved cuts, thin materials.
0077
T 121 GF
–
11.30
67 Bimetal 0.5– 1.5 –
–
0.8 Milled,
wavy set
For very thin metal sheets, perforated sheets
(0.5–1.5 mm).
0079
T 121 AF
–
11.30
67 Bimetal 1 – 3
–
–
1.2 Milled,
wavy set
For thin metal sheets, perforated sheets (1–3 mm).
0081
T 121 BF
–
10.85
67 Bimetal 2.5– 6
–
–
2.0 Milled,
wavy set
For medium metal sheets, perforated sheets
(2.5–6 mm).
0067
T 227 D –
10.10
74
HSS 3 –15 < 30 < 30 3.0 milled;
side set
For thin to thick metal sheets, pipes and profiles
(∅ < 30 mm), specially designed for curved cuts.
0070
T 118 B
5.95
6.85
67
HSS 2.5– 6
–
– progressive
1.9–2.3
Milled,
wavy set
For medium metal sheets, with plunge tip.
0075
T 127 D
6.45
7.45
74
HSS 3 –15 < 30 < 30 3.0 milled;
side set
For thin to thick aluminium sheets,
aluminium pipes + profiles (∅ < 30 mm).
0085
T 118 AF
8.40
9.70
67 Bimetal 1 – 3
–
– progressive
1.1–1.5
Milled,
wavy set
For thin metal sheets.
0086
T 318 A –
12.30
106
HSS 1 – 3 < 65 –
1.2 Milled,
wavy set
For thin metal sheets, aluminium,
pipes + profiles (∅ < 65 mm).
0090
T 318 AF 13.35 15.45
106 Bimetal 1 – 3 < 65 –
1.1 Milled,
wavy set
For thin metal sheets, sandwich material (< 65 mm),
pipes and open profiles incl. aluminium (∅ < 65 mm).
0095
T 318 BF 13.35 15.45
106 Bimetal 2.5– 6 < 65 < 65 1.8 milled;
side set
For medium metal sheets, sandwich material
(< 65 mm), pipes and open profiles incl.
aluminium/epoxy (∅ < 65 mm).
0091
T 318 B
–
12.30
106
HSS 2.5– 6 < 65 –
2.0 Milled,
wavy set
For medium metal sheets, pipes and profiles incl.
aluminium (∅ < 65 mm), precise angled cut.
0097
T 321 AF
–
17.15
106 Bimetal 1 – 3 < 65 –
1.2 Milled,
wavy set
For thin sheet metal, perforated metal (1–3 mm),
sandwich materials (< 65 mm), thin-walled
pipes, closed + open profiles incl. aluminium
(< 65 mm), GFK/Epoxy (< 65 mm).
0099
T 321 BF
–
17.15
106 Bimetal 2.5– 6 < 65 < 65 2.0 Milled,
wavy set
For medium thin sheet metal, perforated metal
(2.5–6 mm), sandwich materials (< 65 mm),
thick-walled pipes, closed + open profiles incl.
aluminium (< 65 mm), GFK/Epoxy (< 65 mm).
0100
T 118 BF
–
9.70
67 Bimetal 2.5– 6
–
– progressive
1.9–2.3
Milled,
wavy set
For medium metal sheets, with plunge tip.
0101
T 123 X –
9.30
74
HSS 1.5–10 < 30 – progressive
1.2–2.6
milled;
side set
For quick straight cuts, thin to thick materials, alumi-
nium pipes + profiles (∅ < 30 mm), with plunge tip.
0140
T 718 BF
–
17.90
154 Bimetal < 120
–
–
2.0 Milled,
wavy set
For sandwich materials (< 120 mm).
(W248)
(W247)
Jigsaw blades for metal
Jigsaw blades
375