376 / 1618
2/122
Cutting Tools
2
Saw blade quality:
HSS:
Fully hardened high-speed steel for use in harder materials such
as metal, aluminium and non-ferrous metals.
Bimetal:
Highly flexible, almost non-breakable combination of HSC
and HSS, long service life. Can be used for hard woods, abrasive
wooden materials, hard plastic, non-ferrous metals and metals.
Tooth design:
Teeth milled, clearance wavy set:
Blade with fine result for straight
cuts in plywood, soft steel, aluminium, non-ferrous metals and
plastics.
Design: 25 pieces in box.
Suitable for:
Bosch, AEG, Milwaukee, DeWalt,
ELU, Festool, Hitachi, Mafell, Makita, Metabo,
Protool.
Order
No.
Bosch No.
2738
2739
Cutting length
mm
Material Metal
mm
Tooth pitch Type of tooth
Use
0025
T 118 A
26.90
31.00
67
HSS 1–3 progressive
1.1–1.5
Milled, wavy set
For thin metal sheets, with plunge tip.
0045
T 118 AF
–
41.00
67
Bimetal
1–3 progressive
1.1–1.5
Milled, wavy set
For thin metal sheets.
(W248)
(W247)
Jigsaw blades for metal in storage box
Jigsaw blades for stainless steel
Order
No.
Bosch No.
2736
Cutting length
mm
Material
Metal
mm
Tooth pitch
mm
Type of tooth
Use
0057
T 118 GFS
11.60
57
Bimetal
0.5–1.5
0.8
Wavy set; milled
For INOX materials.
0068
T 118 EFS
11.60
57
Bimetal
1.5–4
1.4
Wavy set; milled
For INOX materials.
0108
T 118 AHM
21.60
59
Carbide
1.5–3
1.1
carbide tipped; ground
For working thin stainless steel sheets, with reduced
stroke rate, cooling, without orbital action.
0109
T 118 EHM
21.60
59
Carbide
2 –5
1.4
carbide tipped; ground
For semi-thick stainless steel sheets (INOX),
with metal reduced stroke rate, with coo-
ling working without orbital action.
(W247)
Saw blade quality:
Bimetal:
Highly flexible, almost non-breakable combination of HSC
and HSS, long service life. Can be used for hard woods, abrasive
wooden materials, hard plastic, non-ferrous metals and metals.
Carbide-tipped:
The HSC blade is equipped with carbide teeth and
is thus suitable for abrasive materials such as glass-fibre-reinforced
plastics, asbestos cement, hard woods and aerated concrete.
Tooth design:
Teeth milled, side clearance wavy set.
Blade with fine result for
straight cuts in soft steel, aluminium, non-ferrous metals and
plastics.
Tooth pitch:
Small tooth pitch for fine cuts with slower work progress,
in hard and/or thin material such as metals and non-ferrous
metals.
Application:
Saw blades are subject to high mechanical
and thermal loads. For this reason, the use
of specific coolants, e.g. cutting oil (for steel,
metals), is recommended in order to extend the wear-resistance
of the saw blade.
Design: 5 pieces on card (exception: 2736 0108 and 2736 0109,
3 pieces on card).
Suitable for:
Bosch, AEG, Milwaukee, DeWalt, ELU, Festool, Hitachi,
Mafell, Makita, Metabo, Protool.
Jigsaw blade for ceramic products
Order
No.
Bosch No.
2736
Cutting length
mm
Material
Ceramic
materials
mm
Type of tooth
Use
0111
T 130 Riff
12.40
59
Carbide
5–15
Carbide-tipped
For soft ceramic wall tiles, GRP, cast iron, coarse cut.
(W247)
Saw blade quality:
Carbide-tipped:
The HSC blade is equipped with carbide teeth and
is thus suitable for abrasive materials such as glass-fibre-reinforced
plastics, asbestos cement, hard woods and aerated concrete.
Application:
Saw blades are subject to high mechanical and thermal loads. For this
reason, the use of specific coolants, e.g. cutting oil (for steel, metals)
or water (for aluminium, INOX, thin sheets), is recommended in order
to extend the wear-resistance of the saw blade.
Design: 3 pieces on card.
Suitable for:
Bosch, AEG, Milwaukee, DeWalt,
ELU, Festool, Hitachi, Mafell, Makita, Metabo,
Protool.
Jigsaw blades
376