711 / 1618
3/189
Articles marked ◊ are not held in stock, procurement is effected at short notice.
Clamping
Systems
3
Design:
With transverse pole pitch. A strong permanent-ceramic
magnet system with low installation height and narrow pole pitch
enables deployment for many tasks. A long and maintenance-free
service life is ensured by the cast iron base body and robust upper
plate as well as through the magnetic system. Machining of the upper
plate without impairing the holding force is possible up to a depth
of 15 mm in steel and 7 mm in NFM materials. Attachment on the
machining tables is done using 2 clamping jaws.
Lines of force:
approx. 8 mm above the pole plate,
therefore no
magnetisation of the tools.
Holding force:
max. 80–100 N/cm
2
with ground workpiece clamping
surface.
Application:
Ideal for machining on surface grinding machines.
Can furthermore be used on spark erosion systems.
Scope of delivery:
Clamping plate with 2 stop bars.
Note:
Further dimensions available on request.
Machining of the upper plate without impairing the holding force is
possible up to a depth of 15 mm in steel and 7 mm in NFM materials.
The clamping plates are normally supplied with 2 stop bars.
Order
No.
Table size A x B
mm
3958
Pole pitch
mm
Base area C x D
mm
F
mm
Weight
kg
0010
250 x 150
794.00 ◊
St 6/NE 5
258 x 147
65
15
0020
300 x 150
921.00 ◊
St 6/NE 5
308 x 147
65
18
0030
350 x 150
1021.00 ◊
St 6/NE 5
358 x 147
65
21
0040
400 x 200
1487.00 ◊
St 6/NE 5
413 x 197
72
32
0050
450 x 200
1620.00 ◊
St 6/NE 5
463 x 197
72
36
0060
500 x 200
1759.00 ◊
St 6/NE 5
515 x 197
72
40
(W350)
BM permanent-magnetic clamping plate
Design:
With transverse pole pitch in
reinforced magnetic design.
The double and reinforced permanent-ceramic magnetic system
distributes the clamping force very highly and evenly. A long and
maintenance-free service life is ensured by the solid cast iron base
body and robust upper plate as well as through the magnetic system.
Machining of the upper plate without impairing the holding force is
possible up to a depth of 15 mm in steel and 7 mm in NFM materials.
Attachment on the machining tables is done using 2 clamping jaws.
Lines of force:
approx. 10 mm above the pole plate,
therefore no
magnetisation of the tools.
Holding force:
max. 120–150 N/cm
2
with ground workpiece
clamping surface.
Application:
Für difficult cutting machining.. Ideal for milling, planing,
drilling, grinding and eroding.
Scope of delivery:
Clamping plate with 2 stop bars.
Note:
Further dimensions available on request.
Machining of the upper plate without impairing the holding force is
possible up to a depth of 15 mm in steel and 7 mm in NFM materials.
The clamping plates are normally supplied with 2 stop bars.
Order
No.
Table size A x B
mm
3959
Pole pitch
mm
Base area C x D
mm
F
mm
Weight
kg
0010
250 x 150
1013.00 ◊
St 8/NE 5
260 x 145
93
20
0020
300 x 150
1139.00 ◊
St 8/NE 5
310 x 145
93
24
0030
350 x 150
1256.00 ◊
St 8/NE 5
360 x 145
93
28
0040
400 x 200
1757.00 ◊
St 8/NE 5
395 x 195
93
39
0050
500 x 200
2031.00 ◊
St 8/NE 5
495 x 195
93
49
0060
600 x 200
2366.00 ◊
St 8/NE 5
595 x 195
93
64
(W350)
BM permanent-magnetic clamping plate
Magnetic clamping device
711