712 / 1618
3/190
Clamping
Systems
3
Design:
With transverse pole pitch and extremely low installation
height. The high-energy neodymium-iron-boron NdFeB (noble earths)
magnet system, the small installation height and the finest pole pitch
offer a great variety of application options. The massive construction
of the base body and the stable upper plate as well as the high-energy
magnetic system ensure an extremely long and maintenance-free
service life. All clamping plates are equipped with a removable actuating
lever. Machining of the upper plate without impairing the holding force
is possible up to a depth of 5 mm. Attachment on the machining tables
is done using 2 clamping jaws.
Holding force:
max. 80–100 N/cm
2
(magnet quality N50) with ground
workpiece clamping surface.
Application:
The clamping plates have been especially designed for
clamping very thin and small workpieces. The clamping systems can
also be used on spark erosion systems.
Scope of delivery:
Clamping plate with 2 stop bars.
Note:
Further dimensions available on request.
The upper plate can be machined up to a depth of 5 mm without
impairing the holding force. The clamping plates are normally supplied
with 2 stop bars.
Order
No.
Table size A x B
mm
3960
Pole pitch
mm
Base area C x D
mm
Overall height F
mm
Weight
kg
0010
150 x 100
691.50 ◊
St 1.5/NE 0.8
165 x 100
40
5
0020
250 x 150
881.50 ◊
St 1.5/NE 0.8
265 x 150
40
13
0030
350 x 150
1141.00 ◊
St 1.5/NE 0.8
365 x 150
40
18
0040
450 x 150
1408.00 ◊
St 1.5/NE 0.8
465 x 150
40
23
(W350)
BM permanent-magnetic clamping plate
Design:
With the finest transverse pole pitch, easy to pivot across
the longitudinal axis and permanent-magnetic clamping plates. The
high-energy neodymium-iron-boron NdFeB (noble earths) magnet
system and the finest pole pitch offer a great variety of application
options. The massive construction and the stable upper plate as well
as the high-energy magnetic system ensure an extremely long and
maintenance-free service life. All clamping plates are equipped with a
removable actuating lever. The sine bar clamping table is of all-steel
construction, can be swivelled up to 75° and has an extremely low
installation height. The gauge blocks can be adjusted up to 45°. The
support surface for gauge blocks lies 2 mm below the 0 line, thus
allowing very small angles to be set: the setting accuracy for the angle
is ± 5 arc seconds. Machining of the upper plate without impairing the
holding force is possible up to a depth of 5 mm. Attachment on the
machining tables is done using clamping jaws.
Lines of force:
The magnetic field generated during operation is very
low, and thus the residual magnetism in the workpiece and tool is
insignificant.
Holding force:
max. 80–100 N/cm
2
(magnet quality N50) with ground
workpiece clamping surface.
Application:
Ideal for the extremely precise grinding of very thin
and small workpieces with non-parallel surfaces. The angles can bet
set using gauge blocks. The table needs to be locked into place on
the main shank in order to avoid any oscillations during the grinding
process. The clamping systems can also be used on spark erosion
systems.
Scope of delivery:
Sine bar clamping table with 2 stop bars and a
sine lookup table.
Note:
Further dimensions available on request.
The upper plate can be machined up to a depth of 5 mm without
impairing the holding force. The clamping plates are normally supplied
with 2 stop bars.
Order
No.
Table size A x B
mm
3961
Pole pitch
mm
Base area D x E
mm
Overall height F
mm
Dimension C
mm
Weight
kg
0010
250 x 150
2317.00 ◊
St 1.5/NE 0.8
250 x 150
77
125
18
0020
300 x 150
2619.00 ◊
St 1.5/NE 0.8
300 x 150
77
125
22
(W350)
BM precision sine bar clamping table
Magnetic clamping device
712