947 / 1618
5/73
Articles marked ◊ are not held in stock, procurement is effected at short notice.
Hand Tools
5
Design:
Backlit LCD display with user guidance. Acoustic and optical signals for ease of use
and warning notices for high operational reliability. Automatic calibration on different surfaces
and containment of measurement objects, one-button operation. Supplied with battery.
Application:
For the location of joists, hollow spaces, pipes and wires in walls. In metal mode,
non-live conductors below the plaster are also located.
Measurement depth:
Stud framing (wood/metal): 1– 4 cm
Cavities:
1– 4 cm
Copper:
0– 5 cm
Iron:
0–10 cm
Power lines:
0– 4 cm
Order
No.
5562
0500
61.40
(W465)
Tracking device MultiFinder Plus
Design:
Transmitter and receiver feature a high-contrast, illuminated LCD display.
Exact localising of the device under test using the bar chart, numerical display and
acoustic signals; also displays the DC and AC voltage. The encoded transmitter signal
means that it is possible to use up to 7 transmitters and one receiver. In addition,
the device features a permanent AC voltage warning, high transmitter frequency and
measuring point illumination.
Application:
For the localising of electrical cables, fuses, circuit breakers, metal pipes
as well as disconnections and short circuits in complex installations. Applicable with
and without mains power, from 12 V to 400 V.
Scope of delivery:
locating device, connector cable, measuring probes, measuring
clamps and 2 6LR61 monobloc batteries.
Order
No.
Measuring depth
5562
0200
Voltage search:
0–0.4m
Single pole measurement: 0–2.0m
Bipolar measurement:
0–0.5m
252.00
(W465)
CableTracer Pro cable locator
CAT
III
Design:
Tested and approved according to
VDE 0680/6
. Blades made of tool steel,
nickel-plated. The display system (LED) is integrated into handle.
Order
No.
Total length
mm
5532
5564
0004
140
1.17
–
0005
150
–
1.56
0010
190
1.47
1.92
(W514)
(W514)
Voltage testers, single-pole
5532
5564
5532
Standard voltage tester,
for
120–250 Volt
. Handles made of clear plastic,
with metal clip.
5564
Euro voltage tester,
for
125–250 V.
Handle made of red plastic with hand
protection and insulated plastic clip.
Design:
Tested and approved according to
DIN 57680/6 and VDE 0680/6.
Blades made of
tool steel, insulated. The display system (LED) is integrated into the clear ABS plastic handle.
With metal clip.
Order
No.
Voltage range
V
5563
Total length
mm
0006
150–250
5.85
150
(W543)
Voltage testers, single-pole
Tracking devices/voltage tester
947