949 / 1618
5/75
Articles marked ◊ are not held in stock, procurement is effected at short notice.
Hand Tools
5
Design:
For
5–48 Volt, bipolar,
direct and alternating current. Made of plastic, probe tip
with sliding mechanism as well as test line and rubber-insulated pole clamp.
Application:
Low electricity consumption makes it ideal for looking for faults in electrical
components, as conventional test lamps often cause damage.
Order
No.
Electricity consumption
mA
5570
Cable length
cm
0005
1.5
14.25
130
(W515)
Car Check voltage tester
Design:
Tested and
approved according to EN 61010 and EN 61243-3:2010, bipolar.
Casing made of impact-resistant and unbreakable plastic, with rubber handle zone, two
test handles and flexible connection cable. Supply includes batteries.
Application:
For professional testing of DC and AC voltages, continuity, phase and
polarity as well as phase sequence detection and single pole testing.
Order No.
1000
Display
LED/LCD
5579
61.70
DC voltage
12–690 V
AC voltage
12–690 V
Continuity test
Optical/acoustic
Frequency
40–400 Hz
Phase sequence test
LED
Phase test
LED
Polarity test
LED
Measuring point illumination
yes
Measurement category
CAT IV 600 V, CAT III 1000 V
Protection type
IP 64
Batteries
2 x micro AAA/LR03
(W513)
Voltage tester
IP 64
CAT
IV
600 V
Design:
Tested and approved in line with
EN/IEC 61243-3 (DIN VDE 0682-401), bipolar.
Casing made of impact-resistant and unbreakable plastic, with two test handles and flexible
connection cable. The test handles can be connected and thus used single-handed.
Supply includes batteries.
Application:
For the testing or direct and
alternating current, as well as for continuity,
semiconductor, polarity and phasing tests.
Order No.
0010
0050
0060
0005
0010
Model
Master Check
Combi Check
Combi Check Pro
Digi Check
Digi Check Pro
5571
37.80
–
–
–
–
5572
–
56.70
74.30
–
–
5573
–
–
–
108.00
–
5574
–
–
–
–
130.50
Display
LED
LED
LED
LCD
LCD
Voltage
6–400 V
6–690 V
6–690 V
0.3-690 V
0.3-690 V
Continuity test
–
–
≥ 300 kOhm
≥ 300 kOhm
≥ 300 kOhm
Semiconductor test
–
yes
yes
yes
yes
Phase sequence test
–
LED
LED
LCD
LCD
HOLD function
–
–
–
yes
yes
Phase test
–
LED
LED
LCD
LCD
Polarity test
LED
LED
LED
LCD, 4-digit
LCD, 4-digit
Load connection
–
–
yes
–
yes
Measuring point illumination
–
yes
yes
yes
yes
Protection type
IP 65
IP 65
IP 65
IP 65
IP 65
Operating temperature
–15 °C to +45 °C
–15 °C to +45 °C –-15 °C to +45 °C –15 °C to +45 °C
–15 °C to +45 °C
Batteries
2 x micro AAA/LR03 2 x micro AAA/LR03 2 x micro AAA/LR03 2 x micro AAA/LR03 2 x micro AAA/LR03
(W515)
Voltage tester
IP 65
5574 0010
5573 0005
5572 0060
5572 0050
5571 0010
Voltage tester
949