950 / 1618
5/76
Hand Tools
5
Design:
Tested and
approved in line with EN/IEC 61243-3 (DIN VDE 0682 Part 401),
bipolar.
Casing made of impact-resistant and unbreakable plastic, with rubber handle zone, two
test handles and flexible connection cable. Direct display without push-button (high resistance),
load connection via push buttons (low resistance), vibration alarm.
Application:
For the professional testing of direct and alternating currents, as well as for
phasing and polarity tests with deliberate triggering of the earth leakage circuit breaker.
Order No.
0020
0010
0030
Model
DUSPOL
®
analog
DUSPOL
®
expert
DUSPOL
®
digital
5560
52.50
62.00
94.40
Display
Plunger coil/LED
LED
LED/LCD
DC voltage
12–1000 V
12–1000 V
1–1200 V
AC voltage
12–1000 V
12–1000 V
1-1000 V
Resistance
–
–
0.1–300 kOhm
Continuity test
–
LED, yellow/buzzer
LED, yellow/buzzer
Frequency
–
–
1–1000 Hz
Phase sequence test
LCD
LED, green
LED, green
Phase test
LCD
LED, red
LED, red
Polarity test
LED
LED
LED
Load connection
yes
yes
yes
Vibration alarm
yes
yes
yes
Measuring point illumination
–
yes
yes
Measurement category
CAT IV 600 V, CAT III 1000 V
CAT IV 600 V, CAT III 1000 V
CAT IV 600 V, CAT III 1000 V
Measuring procedure
–
–
TRUE RMS
Protection type
IP 65
IP 65
IP 65
Batteries
–
2 x micro AAA/LR03
2 x micro AAA/LR03
(W514)
Voltage and continuity tester
IP 65
CAT
IV
600 V
5560
DUSPOL
®
analog
For the professional testing of voltage, phasing and
polarity, as well as the rotary field direction.
0020
5560
DUSPOL
®
expert
For professional checking voltage,
continuity,
phase
and polarity as well as the phase sequence. No-contact
phase tester/cable break detector (yellow LED flashing).
Supplied with batteries, voltage display from 50 V even
when the batteries are empty.
0010
5560
DUSPOL
®
digital
For professional checking of voltage,
continuity, diode,
phase and polarity, phase sequence as well as measuring
resistance
and
frequency.
No-contact phase tester/cable
break detector (yellow LED flashing). Measuring point and
display lighting. Supplied with batteries, voltage display
from 50 V even when the batteries are empty.
0030
5560 0030
5560 0010
5560 0020
Design:
Casing made of impact-resistant and unbreakable plastic, with two test handles and
flexible connection cable. The test handles can be connected and thus used single-handed.
Supplied with battery.
Application:
For the professional testing of direct and alternating currents, as well as for
phasing and polarity tests. Voltage display at levels 12; 24; 50; 120; 230; 400;
690 V also in empty or removed batteries.
Order No.
0010
Model
PROFIPOL
®
+
5559
43.00
Display
LED
DC voltage
12–690 V
AC voltage
12–690 V
Continuity test
LED, yellow/buzzer
Phase test
LED, red
Polarity test
LED
Measurement category
CAT III 600 V, CAT II 690 V
Protection type
IP 54
Batteries
2 x micro AAA/LR03
(W514)
Voltage tester PROFIPOL
®
+
IP 54
CAT
III
600 V
m
Voltage tester
950