948 / 1618
5/74
Hand Tools
5
Design:
Made of plastic with red illuminating probe all around, audible alarm and insulated
plastic clip. Supplied with 2 AAA/LR03 micro batteries.
Application:
For the testing of magnetic valves in pneumatic and hydraulic systems, as well
as in the servicing of oil burners. In addition, suitable for testing electrically controlled solenoid
valves in vehicles or machinery of any kind.
Order
No.
Model
5569
Sensitivity
Total length
mm
0030
Magnet Stick
24.30
0.3
152
(W514)
Magnetic field tester, inductive
Design: Alternating current.
Made of shatter-resistant ABS plastic with illuminating probe
all around, depending on the test result green or red as well as acoustic signal generator and
insulated plastic clip. With automatic shutdown after 5 minutes. Supplied with 2 AAA/LR03
micro batteries.
Application:
For locating cable breaks, testing for phase balance and the phase as well as
phase sequence test in three-phase systems.
Order
No.
Voltage range
V
5568
Total length
mm
0150
200–1000
42.40
153
(W514)
Voltage and phase sequence testing, without contact
IP 53
CAT
IV
600 V
Design: Alternating current.
Made of break-resistant ABS plastic with test probe that lights
up red and insulated plastic clip. Supplied with 2 AAA/LR03 micro batteries.
Application:
For the location of cable breaks, defect fuses in plugs and fixtures; checking of
switches, sockets, transformers and FI switches as well as recognising phase conductors and
live wires in distribution boxes.
Order
No.
Voltage range
V
5576
Total length
mm
0010
110–1000
15.10
142
0020
12–1000
21.60
160
(W513)
Voltage tester, inductive
5576 0010
5576 0020
5576
110–1000 V
Additionally with acoustic signal. Also suitable for the recognition of faulty in-line
switches.
0010
5576
12–1000 V
With LED flashlight in pin end. Additionally with discernible signal (vibration).
0020
Design:
For
6–24 Volt, bipolar.
Made of brass, with steel probe,
solid cable and terminal.
Order
No.
Total length
mm
5565
0005
120
3.82
(W514)
Automobile light tester
CAT
III
1000 V
Design: Alternating current.
Made of plastic with test probe that lights up and
insulated plastic clip. Supplied including 2 AAA/LR03 micro batteries.
Application:
For the location of cable breaks, defect fuses in plugs and fixtures,
as well as faulty switches and bulbs connected in series.
Order
No.
Model
5569
Voltage range
V
Total length
mm
0010
Volt stick
®
20.80
230–1000
156
0020
Volt Stick
®
Bright
31.20
20–1000/100–1000
153
(W514)
Voltage tester, inductive
5569 0010
5569 0020
5569
Volt stick
®
With round test probe.
0010
5569
Volt Stick
®
Bright
With flat test probe and integrated bright torch.
With two voltage rages and additional acoustic signal.
0020
CAT
IV
600 V
CAT
III
1000 V
m
m
m
SAGAB
BY ELMA INSTRUMENTS
SAGAB
BY ELMA INSTRUMENTS
Voltage testers/valve testers/automobile light testers
948