26 / 32
8.2.3 KIT4P sticker
The KIT4P sticker makes vehicles equipped with
a KIT4P easily recognizable. Only the associated
Service Kit must be purchased and replaced on
the vehicle during second clutch replacement.
This sticker must be put on the engine environ-
ment once the KIT4P is mounted on the vehi-
cle. It resists increased engine temperatures so
there is no risk when applied to an appropriate
part of the vehicle.
Service Kit: once the KIT4P is installed in the
vehicle, the rigid flywheel does not require
replacement if not damaged. Thus, when
the second clutch replacement is due, only
the cover, the disc and the bearing need to
be replaced. Valeo offers a complete range of
Service Kits which feature this advantage and
hence lead to reduced cost and labor starting
from the second clutch replacement.
8.2.4 KIT4P fitting bolts
During each KIT4P replacement, use the bolts
supplied in the box and respect tightening infor-
mation to avoid any warranty issues.
The flywheel bolts and clutch cover bolts are
always supplied in all KIT4P boxes. They are
specifically designed for each application. Once
tightened and used in operation, they should
not be reused and must be replaced by new
bolts provided in the box each time.
8. KIT4P
Technical support
24