22 / 32
8.1.1 After disassembling the
gearbox from the engine
8.1.2 Fixing the flywheel to the
crankshaft
8. KIT4P
Technical support
20
1
3
2
Check engine crankshaft seal and verify that
there is no oil contaminating the flywheel
Check the condition of the gearbox input
shaft splines
Block the flywheel in rotation before removal
of the flywheel bolts (1)
Check the gearbox input shaft seal
Check the clutch actuator (guiding tube
surface, clutch lever, receiver push rod or
concentric slave cylinder) (2)
g
g
g
g
g
Position the flywheel to the crankshaft centre
Tighten the bolts in star sequence to the specific
tightening torque and angle (3)
g
g