EoW January 2009

51 / 88

EuroWire – January 2009 49
wire drawing machines
Shanghai Lizhi Machinery Co Ltd specialises in
the research and development of micro-fine
and fine metal wire drawing and annealing
equipment for precious metal, non-ferrous metal,
ferrous metal and stainless steel.
The LZDM-80/21 wire drawing machine is
suitable for drawing extremely thin, precious
metal wire rod. The maximum inlet diameter is
0.12mm with a minimum finished wire diameter
of 0.015mm. Machine speed is 600 metres per
minute. The drawing process is completely
automatic, with a PLC-programmed control
system. Ten pre-programmed operations can be
stored. Axial motion Shi Paixian has many kinds
of platoon line ways including straight platoon,
incline row of line and spherical surface row of
line.
The LZDM-480/01 is suitable for drawing
extremely thin, precious metal wire rod bus bar.
The maximum inlet wire diameter is 8mm with
a minimum finished wire diameter of 1.5mm.
The machine speed is 50-80 metres per minute.
This single-drum wiredrawing machine gradually decreases the wire diameter by threading wires through one die until the target
wire diameter is reached. Settings such as drawing speed and traverse pitch can be set up for every process via a touch panel on the
10.4" colour touch screen.
Shanghai Lizhi Machinery Co Ltd – China Fax: +86 21 5284 4396 Email: Website:
The LZDM-80/21 ❍ ❍
Fine metal wire drawing