WCA May 2007

45 / 67

Technology News
43 Wire & Cable ASIA – May/June 2007
The X-Ray 8000 and X-Ray 2000 from
Sikora measure power cables without
requirements of calibration or lengthy
set-up routines, with information
available as soon as the extrusion is
started.
Sikora’s technical approach provides
the operator with information when he
needs it saving materials and money.
The Ecocontrol 2000 processor system
provides for the integration of the
range of Inline 2000 series gauges into
one common system.
The touch-screen driven device
simplifies operator interface while
offering the state-of-the-art approach
to FFT/SRL examinations, tandem
extrusion control and eccentricity
graphical analysis.
The full range of Inline 2000 systems
start with the support of the diagnostics
software for each device.
This software for the full range of
devices offers flexibility in ease of
configuration, as well as expanding the
range of information available from a
standard device.
True innovation reflects the technique
employed in the Laser 2000 series XY
and triple axis diameter measurement
devices.
No moving parts means lower
maintenance and cost of manufacture
while Laser diffraction analysis
techniques, supported by Texas
Instruments DSP, provides the highest
data rates and FFT/SRL analysis done
inside the device.
The Centreview 2000 series pro-
vides non-contact measurements
of eccentricity, diameter and wall
thickness all from one system on a
non-contact basis.
The other devices of the Inline 2000
range of products offer similar benefits.
Sikora AG – Germany
Fax: +49 421 489 0090
Email:
Website:
Saving materials and money with Sikora
Take the technical approach from Sikora ▲
Spools for any load
NIWAR Trommel- und Spulenbau GmbH, Germany, produces spools for
coil winding according to German standards (DIN), with central sealing or
bolt fixing.
The company also supplies single part coiling and stranding spools, despatch
spools, storage drums and energy supply drums for current, gas and liquid
supply on-site and in workshops.
Diameter sizes range from 100mm-4,500mm for all demands of load, and
shot peened surfaces provide a first class finish. Static or electronic computer
aided balancing is available, with a control certificate for a quiet run and
precise acceptance of the coiling product at high speed, on request.
All NIWAR spools are of solid welded construction, designed for nearly every
load, from normal to heavy duty.
NIWAR Trommel- und Spulenbau GmbH – Germany
Fax: +49 271 89 09 172
Email: Website: