852 / 1562
4/124
Vertical linear measuring device
Design:
Large range of applications, two device sizes with 415 or
715 mm or 16 inch and 28 inch measuring span. Electronics protected
against solid and liquid contaminants such as dust, metal particles,
water spray or oil
(device IP 55, electronics and measuring system
IP 65).
Control panel with increment values 0.001/0.005/0.01 mm
or 0.0001/0.0002/0.001 inch. Accuracy with standard accessories:
8 µm. Magnetic TESA measuring system for tough workshop condi-
tions. Large digit display and symbols for measurement function.
Can be switched between metric and inch measurement systems.
RS 232 interface for data transmission.
Function:
Dynamic workpiece detection with consistently even
measuring force. High reliability, simple measurement of holes and
shafts due to the unique, TESA-patented system for automatic search
for the culmination point. Confirmation of completed measurement
value acceptances through acoustic signal, programmable. Recording
of parallelism deviations. Zero setting of the display to any point within
the measurement range. Preset function for entry of the required
measurement values.
Supplied:
Standard measuring insert carrier, standard measuring insert
with measuring ball ∅ 5 mm made of carbide. One reference piece
for determining the measuring probe constant (nominal value 6.350
mm/0.250 inch). One rechargeable battery pack 6 V, one mains adap-
ter 100 ÷ 240 Vac/50 ÷ 60 Hz, one EU mains cable and one US mains
cable for the mains adapter, in transport packaging.
Note:
Accessories for TESA HITE and magna can be found on
Ç
4/128.
Order
No.
Measuring span
mm
4850
Measurement range
mm
0400
415
2930.00
0–570
0700
715
3443.00
0–870
(495)
Vertical linear measuring device HITE magna 400/700
Resistant under extreme workshop conditions
The TESA-HITE 400 and 700 have been designed on the basis of
years of experience. They are equipped with the patented magnetic
measuring system TESA magna µ System and can be used in the
most difficult ambient conditions. Each device is resistant to solid and
liquid contamination of any kind.
Thanks to its excellent characteristics and the exceptionally good
price-performance ratio, these measuring devices are essential in
production areas. They provide future-orientated design, robustness
and reliability in direct proximity to your machine.
The battery-powered TESA-HITE 400 and 700 are suitable for
measuring heights and graduations, diameters, hole distances,
groove widths etc.
Factory
standard
IP 55 IP 65
SCS
calibration
certificate
RS232
All stocked articles available within 24 hours by UPS Express.
All prices excluding VAT per piece (if not stated otherwise).
4
Measuring
Equipment
852