853 / 1562
4/125
Vertical linear measuring device
Design:
Large range of applications, two device sizes with 415 and 715
mm or 16 inch and 28 inch measuring span. Electronics protected against
solid and liquid contamination such as dust, metal particles, splashing
water or oil
(device IP 40, electronics IP 65).
Control panel with numeri-
cal increments 0.0001/0.001/0.01 mm or 0.00001/0.0001/0.001 inch.
Accuracy with standard accessories (2.5 + 4*L) µm (L in m). Patented
opto-electronic TESA measuring system. Consistently high accuracy
through long-term stability of glass scale. Large digit display and symbols
for measurement functions. Can be switched between metric and inch
measurement systems. RS 232 interface.
Function:
Slight offset of the measuring device on the test plate due
to integrated air bearing. Dynamic workpiece detection with consistently
even measuring force. High reliability, simple measurement of holes and
shafts due to the unique, TESA-patented system for automatic search
for the culmination point. Confirmation of completed measurement value
acceptances through acoustic signal, programmable. Recording of par-
allelism deviations. Measurement of perpendicularity deviations using a
digital measurement value adapter with information on the angle of the
best-fit straight lines. Zero setting of the display to any point within the
measurement range. Preset function for entry of the required values.
Supplied:
Standard measuring insert carrier, standard measuring insert
with test rod and measuring ball ∅ 5 mm made of carbide. One reference
piece for determining the measuring probe constant (nominal value
6.350 mm/0.250 inch). One electric pump for air bearing of the device
base on the test plate, mounted, one rechargeable battery pack 6 V,
one mains adapter 100 ÷ 240 Vac/50 ÷ 60 Hz, one EU mains cable
and one US mains cable for the mains adapter, in transport packaging.
Note:
Accessories for TESA HITE and magna can be found on
Ç
4/128.
Order
No.
Measuring span
mm
4852
Measurement range
mm
0400
415
4172.00
0–570
0700
715
4828.00
0–870
(495)
Vertical linear measuring device HITE 400/700
Equipped with a patented opto-electronic measuring system based on
an incrementally divided glass scale, the TESA-HITE 400 and 700 are
characterized by accuracy, reliability and robustness. Ideal measuring
aids for the workshop area.
The battery-powered TESA-HITE 400 and 700 are suitable for
measuring heights and graduations, diameters, hole distances and
groove widths.
Factory
standard
IP 40
IP 65
SCS
calibration
certificate
RS232
4
Measuring
Equipment
Articles marked ◊ are not held in stock, procurement is effected at short notice.
Not all items are available in every country.
853