945 / 1562
5/75
Articles marked ◊ are not held in stock, procurement is effected at short notice.
5
Hand Tools
Design:
Tested and
approved in line with EN/IEC 61243-3 (DIN VDE 0682 Part 401),
bipolar.
Casing made of impact-resistant and unbreakable plastic, with rubber handle
surface, two test handles and flexible connection cable. Direct display without push-button
(high resistance), load connection via push buttons (low resistance), vibration alarm.
Application:
For professional testing of DC and AC voltages and for phase and polarity tests
with deliberate triggering of the earth leakage circuit breaker.
Order No.
0020
0010
0030
Model
DUSPOL
®
analogue
DUSPOL
®
expert
DUSPOL
®
digital
5560
51.20
60.50
92.10
Display
Plunger coil/LED
LED
LED/LCD
DC voltage
12–1000 V
12–1000 V
1–1200 V
AC voltage
12–1000 V
12–1000 V
1–1000 V
Resistance
–
–
0.1 kOhm-300 kOhm
Continuity test
–
LED, yellow/buzzer
LED, yellow/buzzer
Frequency
–
–
1–1000 Hz
Phase sequence test
LCD
LED, green
LED, green
Phase test
LCD
LED, red
LED, red
Polarity test
LED
LED
LED
Load connection
yes
yes
yes
Vibration alarm
yes
yes
yes
Measuring point illumination
–
yes
yes
Measurement category
CAT IV 600 V, CAT III 1000 V
CAT IV 600 V, CAT III 1000 V
CAT IV 600 V, CAT III 1000 V
Measuring procedure
–
–
TRUE RMS
Protection type
IP 65
IP 65
IP 65
Batteries
–
2 x micro AAA/LR03
2 x micro AAA/LR03
(514)
Voltage and continuity tester
IP 65 CAT
IV
5560
DUSPOL
®
analogue
For the professional testing of voltage, phasing and polarity,
as well as the rotary field direction.
0020
5560
DUSPOL
®
expert
For professional checking voltage,
continuity,
phase and
polarity as well as the phase sequence. No-contact phase
tester/cable break detector (yellow LED flashing). Supplied
with batteries, voltage display from 50 V even when the
batteries are empty.
0010
5560
DUSPOL
®
digital
For professional checking of voltage,
continuity, diode,
phase and polarity, phase sequence as well as measuring
resistance
and
frequency.
No-contact voltage tester/cable
break detector (yellow LED flashing). Measuring point and
display lighting. Supplied with batteries, voltage display
from 50 V even when the batteries are empty.
0030
5560 0030
5560 0010
5560 0020
Design:
Made of durable nylon fabric with hook-and-loop fastener and belt loop.
Order
No.
Dimensions
mm
5560
1000
330 x 100 x 60
16.90
(514)
Protective case for voltage tester DUSPOL
®
m
Design:
Housing made of impact resistant and unbreakable plastic, with two test handles, flexible
test leads and a magnet holder. With visual and audible signal, external voltage and battery
voltage display. Precise high power LED flashlight, buzzer volume (3-stage/OFF) and luminosity
(4 levels) adjustable. Integrated self-test for LED, LED flashlight and buzzer. Supplied without
batteries.
Application:
For high and low resistance continuity testing of electrical wiring, facilities,
equipment and components as well as for polarity testing and contactless phase testing phase.
Order No.
0010
Continuity test
0–100 Ohm/1 kOhm/10 kOhm (LED/buzzer)
5575
29.90
Polarity test
LED
External voltage display
6 V–400 V (LED/buzzer)
Measurement category
CAT III 300 V
Protection type
IP 30
Batteries
3 x Mignon AA/LR6
(514)
Continuity and line tester DUTEST
®
pro
CAT
III
m
Voltage and continuity tester
Not all items are available in every country.
945