948 / 1562
5/78
All stocked articles available within 24 hours by UPS Express.
All prices excluding VAT per piece (if not stated otherwise).
5
Hand Tools
Design:
Housing made of impact-resistant, unbreakable plastic, with automatic shutdown
function.
Application:
For the safe current measurement at insulated cables, without having to remove
or damage the insulation.
Order No.
0101
0102
0200
0501
0700
Model
CM 1-1 CM 1-2
CM 2
CM 5-1
CM 7
5585
59.60
79.70
170.90
247.00
265.90
DC voltage
– 0.1 V–600 V 1 mV–600 V 0.7 V–1000 V 0.1 V–1000 V
AC voltage
– 0.1 V–600 V 0.1 mV–
600 V
1.3 V–750 V 0.1 V–750 V
Direct current
–
–
10 mA–
300 A
0.9 A–600 A 0.1 A–1000 A
Alternating current
10 mA–
400 A
0.1 A–400 A 100 mA–
300 A
0.9 A–600 A 0.1 A–1000 A
Resistance
–
0.1 Ohm–
20 MOhm
0.1 Ohm–
40 MOhm
1 Ohm–
10 kOhm
0.1 Ohm–
400 Ohm
Continuity
–
yes
yes
yes
yes
Frequency
–
–
–
–
1 Hz–400 Hz
Measured data storage
HOLD, MAX HOLD HOLD, MAX HOLD HOLD, MAX/
MIN, PEAK,
ZERO
Measuring procedure
RMS
RMS TRUE RMS TRUE RMS TRUE RMS
Pliers opening
30 mm 30 mm 25 mm 35 mm 53 mm
Measurement category
CAT III 600 V CAT III 600 V CAT III 300 V CAT IV 600 V CAT IV 600 V
Protection type
IP 30
IP 30
IP 30
IP 30
IP 30
Batteries
1 x 6LR61
block
battery
2 x micro
AAA/LR03
2 x micro
AAA/LR03
1 x 6LR61
block
battery
1 x 6LR61
block
battery
Display
LCD
LCD
LCD
LCD
LCD
(514)
Digital current clamp multimeter
IP 30
5585 0101
5585 0102
5585 0501
5585
CM 1-1
Supplied with compact protective bag and battery.
0101
5585
CM 1-2
Supplied with compact protective bag, battery and dual-insulated safety
measurement lines.
0102
5585
CM 2
Precise due to true RMS measurement procedure TRUE RMS. Tested and
approved according to IEC/EN 61010-1 (DIN VDE 0411-1).
Ideal for measuring small currents. Supplied with compact protective bag, double
insulated safety measurement cables and batteries.
0200
5585
CM 5-1
Automatic selection of correct measuring function, incorrect measurements
as a result of choosing the wrong measuring range prevented, quick reaction times
thanks to 5 samples per second. The voltage measurement takes place with low
input impedance (LoZ) for the suppression of capacitive/inductive interspersed
voltages. For continuity and diode testing. Supplied with compact protective bag,
double insulated safety measurement cables and battery.
0501
5585
CM 7
Ideal for measuring current up to 1000 A (alternating and direct current).
Supplied with compact protective bag, dual-insulated safety measurement lines and
batteries.
0700
CAT
IV
CAT
III
CAT
III
Design:
Housing made of impact-resistant, unbreakable plastic, with automatic shutdown
function. Automatic range selection, resolution of 1 uA at 6 mA measuring range. Precise due
to true RMS measurement procedure TRUE RMS. Optimally shielded from foreign fields.
Supplied with compact protective bag and batteries.
Application:
For locating current leakages and measuring leakage and residual currents in
electrical installations (VDE 0100) and devices (VDE 0701/0702, DGUV Rule 3, Industrial
Safety Ord.). Measurement during normal operation of the plant/unit, ideal for preventive
maintenance and troubleshooting, reliable and easy to locate insulation faults. Switchable
low-pass filter (50–60 Hz).
Order No.
0900
Model
CM 9
5585
393.00
Alternating current
1 µA–100 A
Measured data storage
HOLD, PEAK
Measuring procedure
TRUE RMS
Pliers opening
40 mm
Measurement category
CAT III 300 V
Protection type
IP 30
Batteries
2 x micro AAA/LR03
Display
LCD
(514)
Current leakage meter
IP 30 CAT
III
5585 0200
CAT
III
5585 0700
CAT
IV
Test and measuring devices
948