59
www.read-wca.comWire & Cable ASIA – September/October 2015
Technology
news
RENOVA has introduced the new powerful and reliable
Moviroll roll pushers – pneumatic and battery driven.
Renova’s Moviroll systems allow the operator to effortlessly
manoeuvre both large and small cylindrical loads on a flat
surface and then place them on the roll stand shuttle cart.
Compact, heavy-duty, fast and with low or no maintenance
requirements, the new Moviroll roll pushers allow the
movement of the load in a continuous and regular way and
are suitable for handling wire and cable rolls, corrugated,
paper and tissue rolls in a simple and safe manner.
All Moviroll models are designed and made in Italy.
Pneumatic model: The MR pneumatic Moviroll uses the
power of a pneumatic gear motor that is powered by
pressurised and lubricated air at 6 bar (90 psi).
Two models, each with two different handle configurations
(straight handle or curved ‘S’ handle) comprise the range:
• Models MR100/MR100 S have a thrust force of
10,000kg (22,000lb) and a lift force of 2,500kg (5,500lb)
• Models MR200/MR200 S have an increased thrust force
of 20,000kg (44,000lb) and a lift force of 5,000kg
(11,000lb)
Battery model: The new MRE battery-powered Moviroll
offers the advantage of free movement without the
constraints of pneumatic connections or electrical cables.
It is equipped with a 24V DC IP 44 sealed brushed motor
powered by a 24V battery and a sophisticated electronic
system that supervises the operating parameters of the
motor and battery, and intervenes to safeguard the
Moviroll when they exceed those eligible.
In case of anomaly a flashing LED allows you to identify
the problem and solve it. The high performance battery is
housed in an 8mm chassis and ensures the operator to
move from 60 to 120 rolls with only a battery charge. The
MRE Moviroll is provided with a second battery (optional).
The plug and play batteries allow quick changes of the
battery without interruption during operation. The intelligent
charger autonomously decides on the duration of the
recharge, depending on the state of the battery charge.
Great importance has been given to the system design. The
ergonomic handle and throttle have been designed in such a
way as to simplify the Moviroll handling during both the
forward gear and reverse gear. The throttle is equipped with a
speed command that allows variable speed to suit any
operator needs. The oversized rear wheels are designed to
overcome obstacles such as holes, chains and shuttle cart.
The battery Moviroll is available in three models, each with
two different handle configurations (straight handle or
curved ‘S’ handle).
• Models MRE100/MRE100 S have a thrust force of
12,000N (26,450lb) and a lift force of 3,000kg (6,600lb)
• Models MRE200/MRE200 S have a thrust force of
16,000N (35,300lb) and a lift force of 4,000kg (8,800lb)
• Models MRE300/MRE300 S have a thrust force of
20,000N (44,100lb) and a lift force of 5,000kg (11,000lb)
Renova Srl – Italy
Website
:
www.renova-srl.itPneumatic and battery driven roll pushers
❍
New Moviroll roll pushers from Renova