TPT November 2009

125 / 132

Tube M ills and Roll Forming Lines
November 2009 123 ›
n
New tube mill
installed in
Yekaterinburg
ATTL A SPOL SRO, Czech Republic, has
installed and commissioned a new tube
mill in Yekaterinburg, Russia, to produce
longitudinally welded tubes and profiles from
steel and galvanised material, 102x5mm.
The mill features new semi-automatic
coil end welder and shear NPA, fast
change of forming and calibration sections
RVS system, and an ALDA Combi flying
cut-off which can cut by flying shear for
speed or flying cold saw when quality of
the cut-off face is of prime importance.
The ALDA Combi enables both operations
on one machine, with changeover time of
around 15 minutes.
The mill includes an Attl AUT 8000
fully automatic bundling machine, and is
also equipped with a Thermatool HF
welding generator.
Attl a spol sro – Czech Republic
Fax: +420 271 960 414
Email:
Website:
 Attl a spol has installed a new tube mill
in Yekaterinburg, Russia
INK jet printing is a well established process
and even with competing technologies
introduced into the marketplace, ink jet
technology continues to evolve into the
powerhouse of reliability that any tube pipe
or roll forming and slitting company can still
depend on.
One example of this evolution is Roll
Machining Technologies and Solutions'
(RMTS) ability to mark each foot of the tube,
pipe, roll forming and slitting material at
various speeds using variable data to multiple
locations within a single input source.
This application can be used for
continuous production where speeds
are 1000ft/minute or when paired with
the product sensors it can also sense no
product and the nozzles will not fire until
the product has reached a desired location.
RMTS, USA, is the exclusive distributor of
this REA-Jet technology in the USA.
Because REA-Jet ink jet printing is non-
contact printing, it has the ability to print
on any surface, in any direction, with any
application. Models offered range in dot
quality from drop on demand, continuous
ink jet, and high resolution.
The newest development is the marking
of the weld area with a steady line so the
weld is visible for bending or punching.
RMTS says it will work with customers to
determine the best and most cost effective
system for any customised needs.
The company also claims it is the
recognised leader in roll machine tooling
innovation and is excited to offer the world's
fisrt and only Tube Mill Operator Training
System on DVD. On the film it is possible
to learn from renowned expert Joe Olson
as he guides watchers through every stage
of the mill with his nine part series and
demonstrates techniques that will actually
add life to roll tooling. Contact RMTS for
more information.
RMTS – USA
Fax: +1 815 372 9105
Website:
Innovative ink jet printing for pipe or roll forming
 The TMTS ink jet printing in action