4-5
Cisco IPPhone 7960 and 7940SeriesUser Guide
78-10182-07
Chapter 4 GettingStartedwith FeatureButtons
Using theServicesButton
Step 3
Enter your user ID.
To enter any letter on your LCD screen, use a corresponding number key. Press
the key one or more times to display a particular letter. For example, press the
2
keyone time for “a,” twice quickly for “b,” and three times quickly for “c.”After
you pause, the cursor automatically advances to allow you to enter the next letter.
Press the
<<
soft key if youmake amistake.
Step 4
After entering your user ID, use theNavigation button to scroll down to the PIN
prompt.
Step 5
Enter your PIN and press the
submit
soft key.
The Cisco IP Phone towhich you have logged in now adopts your user profile
information, including your speed dials and established services. The phone also
becomes associatedwith your phone number.
Step 6
Press the
Exit
soft key to return to the previous screen.
Tip
•
If you are logged out of a Cisco IP Phone that has Cisco Extension
Mobility Service configured for it, youwill not be able tomake calls or
check voicemail messages from that phone until you log in. If you can
hear a busy signal after pressing theMessages button or any key on the
touch tone key pad, then youmust log in before using the phone.
•
You cannot log in to a phone that is off the hook.
•
Extensionmobilitymight automatically logyouout after a certain amount of
time. This time limit is established by your system administrator.
•
Ring type, contrast settings, and volume settings are not maintained by your
ExtensionMobility profile; configure these settings directly on the
Cisco IP Phone.
How toLogOut of ExtensionMobility
Whenyou are ready to logout of extensionmobility, press the
Services
buttonon
your phone, then use the Navigation button to select the logout option for
extensionmobility. Press the
Select
soft key. Press the
Exit
soft key to return to
the previous screen.
