TPT September 2009

57 / 140

Technology Update
September 2009 55 ›
and adjusted to customers’ specific needs.
As haul-off units, either a belt haul off
or a caterpillar haul off are available,
both operating with a maximum haul-off
speed of 20m/min. The caterpillar haul-off
is recommended for profiles with special
contours, since it can be perfectly adjusted
to the form of the product.
The haul off is followed by a saw as cutting
device, with a standard saw blade 300mm in
diameter, or optionally 400mm in diameter.
Using a PLC-controlled cutting program, up
Multi-Directional
Forklift
• Capacities from2.5-14 tonnes
• Diesel/LPG/Electric
• Range of attachments
Combilift 4-way sideloader
Combilift Ltd Co Monaghan Ireland
Tel: +353 47 80500 Fax: +353 47 80501
UK Tel: 07815 314990 Email:
• Increases space
productivity
• Safer product
handling
• Indoor and out
Combilift – Customised
Handling Solutions
withCombilift
withoutCombilift
Visit or call for –
FREE warehouse design service
FREE DVD
5621-CL-NEW QUART PG AD 5/3/08 2:44 pm Page 1
AT Plast09 Cincinnati Extrusion GmbH,
Austria presented the Alpha protech
complete line concept for technical
profiles, developed in close cooperation
with Extrunet GmbH. Alpha protech offers
an output of up to 150kg/h, and the profile
dies are manufactured to customers’
specifications. The line can be also run
in and approved directly at Extrunet,
upon request, using materials supplied by
the customer.
For the complete line, five different
Cincinnati extruder models are available
to choose from. These include the single-
screw extruders alpha 45, 60 and 75 for
processing a wide variety of granulates
such as HDPE, PP, ABS, TPE-S or
PVC-soft, as well as the Konos 38 and
50 twin-screw extruders for PVC dry
blend materials.
The entire downstream equipment, starting
with a 6m calibration table, can be controlled
via a 6" touch display at the front end of the
calibration table. The PLC control system
can be operated in six different languages
Turnkey line concept for technical profiles
 The Alpha protech complete line concept from
Cincinnati Extrusion for the production of technical profiles
to six different cutting lengths and numbers
of units can be pre-set. A tipping device is
mounted at the end of the downstream unit.
A number of optional extras are available,
also tailor-made to fit into the complete
package. These include an additional
vacuum pump, a water/air separation tank
including vacuum and water pumps, a water
treatment system and a saw equipped with
a servo drive for higher cutting accuracy.
Cincinnati Extrusion GmbH – Austria
Fax: +43 1 61006 266
Email:
Website: