46
Tube Products International September 2013
7th International
Trade Fair for
Tubes & Pipes, Valves,
Pumps, Fittings and
Components
1–3 October 2013
Imigrantes
Exhibition Centre
São Paulo, Brazil
Held in conjunction with:
Supported by:
In co-operation with:
Messe Düsseldorf GmbH
Postfach 101006 _ 40001 Düsseldorf _ Germany
Mrs Claudia Wiechert
Tel. +49/211/4560-7700 _ Fax +49/211/4560-7740
TUBOTECH 2013 Anzeige 87x260mm.indd 1
25.06.13 08:33
NDT systems at
Tubotech and
Tube SE Asia
Non-destructive test instruments and systems from Magnetic
Analysis Corporation (MAC) will be exhibited at the Polimeter
Comércio e Representações Ltda stand (912) at Tubotech
in São Paulo, Brazil, 1-3 October. Polimeter is MAC’s
representative for Brazil, Chile and Argentina.
MAC will also be at this year’s Tube Southeast Asia show
(17-19 September) at stand P35, co-exhibiting with its Thai
representative, Siam Charn Co, Ltd.
MAC offers three different test technologies: eddy current,
ultrasonic and flux leakage. By combining eddy current and
ultrasonic technology, for example, superior test results can
be obtained as each technique detects the conditions that it
is best suited to find. Applications include inspecting welded
and seamless tubes for automotive applications as well as
oil country tubular goods (OCTG) with or without upset ends.
Both ferromagnetic and non-ferromagnetic materials can be
successfully tested.
Information on the MultiMac
®
eddy current, Echomac
®
FD-5 ultrasonic, and Rotoflux
®
flux leakage test instruments
and systems will be
available at the trade
shows.
The versatile MultiMac
with up to eight test
channels can be used
to detect transverse,
non-continuous and/
or longitudinal, seam-
type surface defects.
The Echomac FD-5
instrument features
up to 32 independent test channels, and provides flaw
detection, and measurement of wall thickness, ID, OD,
ovality and eccentricity. It can be used with MAC’s rotating
transducer units as well as with new or existing immersion,
squirter and other couplant type installations.
The Rotoflux tester is available for transverse and longitudinal
flaw detection. With 48 channels, the Rotoflux systems meet
demanding industry standards for heavy wall OCTG tube. A
recent system for a tube mill has the capability of testing to
within 1" from the tube end.
A range of mechanical handling, test coil platforms, automated
controls, reporting capabilities and electromagnetic
comparators are also available from MAC.
Magnetic Analysis Corporation
– USA
Magnetic Analysis Corporation’s
MultiMac SM with built-in touch
screen monitor
