41 / 60
TEMPERATURE MEASUREMENT
Infrared in high temperature
applications
In the Iron and Steel industry and inmany Foundry applications,
temperature readings show whether processes are operating
within their proper ranges, whether a reheater is too cold or
too hot, whether a stand needs adjusting, or howmuch cooling
should be applied. Each stage can be accurately monitored so
the steel retains correct metallurgical properties as it travels
through the process. Every section of the steel manufacturing
process can benefit from infrared thermometers and the cus-
tomised applications developed b
y Fluke Process Instruments
(formally Raytek and Ircon).These benefits include:
• Higher quality products
• Increased productivity
• Reduced energy costs
• Enhanced worker safety
• Reduced downtime
• Easy data recording
Infrared sensors take temperature measurement one step
further. Fast and accurate analogue and digital output allows
temperature data to be integrated into control system and
simultaneously output for remote temperature monitoring
and analysis. Smart sensors, with digital electronics and 2-way
communications, can be configured remotely from the safety
of the control room - especially important for metals with
changing emissivities. The result is increased functionality
and greater control.
A wide range of optics covers an enormous variety of ap-
plications. This is supported by integrated through-the-lens
sighting, plus either laser or video sighting for correct target
location. Infrared Thermometers are used world wide and in
South Africa in many Iron and Steel applications. These ap-
plications include:
• Continuous casting
• Reheating
• Rolling mills
• Scale breaker, rolling stands, down coiler and coil box
• Cold mills
• Rod/wire mills
Enquiries: R&C Instrumentation.Tel. 086 111 4217
or email
info@randci.co.za Accurate flow measurement for partially filled pipes? The TIDALFLUX 2300 F from KROHNE has got you covered. Backed by over 90 years of expertise in flow measurement, there’s a KROHNE meter for every job. The TIDALFLUX2300F reliably measures flows in pipes filled to between 10% and 100% of their inner diameter. Even fat and oil floating on the surface are not a problem for the TIDALFLUX 2300 F – its capacitive sensors are integrated into the liner and are never in direct contact with the liquid. Featuring a sturdy polyurethane lining, the TIDALFLUX2300F is also perfect for demanding wastewater environments. Ex approvals to ATEX and IECex Zone 1 are available as an option. When a rugged job demands a high degree of precision, the TIDALFLUX2300F performs and never quits. KROHNE – Water is our world. KROHNE South Africa 8 Bushbuck Close Corporate Park South Randtjiespark, Midrand Tel.: +27 113141391 Fax: +27 113141681 Cell: +27 825563934 John Alexander j.alexander@krohne.com www.za.krohne.com Sensitive but strong