593 / 2440
HYDRAULIC HAMMERS
H25D Hammer Features:
●
Streamlined Shape
fits into narrow places.
●
Simple Design
has only two moving parts for mini-
mal maintenance.
●
High Blow Rate
translates to high productivity.
●
Lower Tool Bushing
can be replaced in minutes in the
field.
H35E s-H65E s Hammer Features:
●
Available
in both side plate and silenced versions.
●
Mounting Options
include integral pin-on and flat-top.
●
Gas-fired Operating Cycle
delivers consistent, reliable
performance over time.
●
Auto Shut Off (ASO)
— Instantly stops the piston
when breaking through material. Prevents blank fir-
ing, which is a top cause of hammer wear.
●
Plug and Perform
— No adjustment to pressures or
flows is needed.
●
Dual Ports
optimize hose runs on HEX, BHL and
SSL/MTL machines.
●
One-piece Body
reduces components, eliminates tie
rods and nuts.
●
Single Bushing
design is slip fit and field-replaceable.
●
Tri-suspension System
guides the power cell and gives
manageable, smooth performance.
●
Grease Point
is ergonomically located at standing
height.
●
Cylinder Sleeve
provides replaceable protection for
the cylinder, and drastically cuts labor for rebuilds.
●
Designed to Be Easily Rebuilt
, providing lasting value
for your hammer investment.
H75E s-H95E s Hammer Features:
●
Silencing
is standard on all H75E s and H95E s hammers.
●
Tri-suspension System
buffers the power cell, reduc-
ing noise and vibration.
●
Integral Accumulator
dampens pressure peaks and
pulsation, thus protecting carrier hydraulic system.
●
Gas-fired Operating Cycle
delivers consistent, reliable
performance over time.
●
Automatic Shut-off
protects the hammer from blank
firing and reduces internal wear, protecting the hammer
from less experienced operators.
●
Fully Enclosed Housing
protects the power cell, and
is designed to eliminate stress points.
●
Gas Seal System
assures constant power is maintained
between service intervals.
●
Single Grease Point
provides hammer paste to tool
bushings. Grease point is ergonomically located at
standing height making it comfortable for the operator
to access.
●
Tool Changes
are simple: easily accomplished with
common hand tools. Lower tool bushing can be ser-
viced in the field.
●
Slip Fit Lower Tool Bushing
provides positive tool
alignment, is field replaceable and rotatable.
●
Easy to Maintain
— Gas charges can be checked and
filled with the hammer mounted on the machine.
●
Designed to Be Easily Rebuilt
, providing lasting value
for your hammer investment.
8-2 Edition 47
Hydraulic
Hammers
Features