EuroWire March 2016

156 / 216

wire 2016 show
➣➢➣
4-8 April
March 2016 154
Slipping reduction and the improvement
in the quality of gear transmission,
bearings and seals result in a reduction
of energy consumption by 10-15 per cent
and in a consequent improvement of
production costs.
Die holders have been speci cally
designed to improve wire lubrication
within the die, to reduce friction and
to facilitate the wire cleaning, thereby
enhancing the product quality and
prolonging the die life. Zirconium oxide
pulling rings are used to reach the best
possible quality surface of the wire.
The Sampsistemi Annealing Platform
includes a number of technical features,
such as multi-motor technology,
adjustable pre-heating length and a
wire-walker before contact rings. In
addition, the cleaning device on contact
rings ensures the integrity of the wire
surface and the requested physical
properties (mechanical strength,
elongation, conductivity and resistance),
and maintains the diameter and
roundness of the wire.
The control system is able to set up
production parameters, in particular the
kinematic ratio between each axis, in
order to form a production recipe stored
in the HMI panel. The Annealer Platform
is completed with the latest development
in annealing technology, in particular the
development of the electronic equipment
that reduces current distortion (THD-I) and
energy waste (PF > 0.90).
Also on display will be a Sampsistemi
extrusion group for the sheathing of HV
cables with a diameter of up to 180mm,
with both smooth and corrugated tape.
Thanks to its highly innovative structure,
this extrusion group allows an important
reduction of production costs if compared
to traditional methods.
This new solution has been developed
together with CJ TEK, Samp’s Swiss
technology partner for extrusion
crossheads, which will be a co-exhibitor,
together with Sampsistemi, displaying a
number of high-technology, innovative
crossheads for many di erent applications.
Sampsistemi – Italy
Website:
Rolf Schlicht
Stand: 12A48
Rolf Schlicht GmbH, Hamburg, Germany,
will exhibit di erent versions of its
electrostatic powder coating machines.
The machine model RSC was designed to
powder cables, wires, hoses and pro les
evenly, nely dosed and absolutely
dust-free with powders like talc, stearate,
varnish powder, swellable powder,
graphite, etc.
In the machine there is a fully automatic
and maintenance-free lter system
which is not cleaned o by blowing
in compressed air. Thanks to this lter
system a strong and constant vacuum
is generated in the machine, so that no
powder will escape into the ambient –
guaranteed.
The machine will be manufactured
correspondingly to the extrusion speed
and product diameter. Several options
are available so that it perfectly ts into
the line.
Further exhibits on the stand will be:
Huestis Air Misers: These have been used
for many years in the cable, wire and
pro le industry. The air wipes are low
noise, dry and highly e cient, and pay for
themselves in a short period of time, as
the compressed air consumption is very
low because of a special construction.
Schlicht supplies the Huestis air wipes in
sizes from 1.6 to 178mm diameter.
Special sizes in rectangular shapes
are available on request. They open
automatically to allow knots, splices and
other oversizes to pass without stopping
production or causing damage.
Due to their small size they can be
mounted in any cooling line without
problems.
Rapid Purge cleaning compound: This
ready-to-use cleaning compound
removes all thermoplastic resin and
shortens the cleaning time necessary at
colour or material changes. Moreover, it
is a cleaning compound which is able to
remove burnt material.
Rapid Purge works chemically, without
admixture of abrasive components. It
breaks down the residual plastic polymers
into lower-viscous molecules which can
easily be ushed out of the machine.
This method, which is as smooth as it
is e ective, is gentle on the sensitive
machine parts.
DCA dry ice blasting plants:
• clean and e ective method to clean
tools, moulds, dies, parts and surfaces
– dry ice does not leave residues
behind
• robust systems, long lasting –
production and techniques from
northern Germany
• cleaning plants for every business.
Rolf Schlicht GmbH – Germany
Website:
Setic
Stand: 10E40
Setic designs and manufactures high
quality double twist bunchers/stranders
for power cable and automotive
industries, as well as complete solutions
to produce special/LAN cables with
enhanced performances (in one step or
two steps according to product mix).
The company is continuously developing
new lines and concepts for non-ferrous
cables in order to meet customers’ needs,
such as tandem “mica taping/bunching”,
special high-speed lines for battery cable,
and new high speed lines for special and
instrumentation cables.
Setic combined with Pourtier (also a
member of the Gauder Group) o er a wide
range of twisting/stranding solutions to
cable makers.
▲ The DM 105 from Samp
▲ The RSC powder coating machine from Rolf
Schlicht
▼ Setic backtwist pairing/quadding, 800mm