March 2014
137
wire
2014 show
7
th
- 11
th
April
the subsequent layer below, as a result
enabling the outer jacket, lead sheath or
triple layer XLPE to be reapplied and the
cable repaired.
The latest design lead extruder from
HFSAB is horizontal,
oor standing,
easy to install and maintain, fully auto-
matic, and extremely reliable with its
state-of-the-art control system, enabling
continuous operation for weeks with little
or no variation in temperatures and wall
thickness/concentricity. The lead wall
thickness can be kept to a minimum with
corresponding savings in lead.
A range of die blocks is available to
cover an extensive diameter range of
6mm-225mm (over lead), and a range of
melting pots is available for 10, 18, 35 and
60 tonne capacities.
H Folke Sandelin AB – Sweden
Website
:
Hivotec
Stand: 11C02
A high quality cable preparation tool is
essential for making reliable joints and
terminations for HV cables.
Hivotec has launched the new Series CP
with the following main bene ts:
•
The main application for the tool is the
peeling of the semicon on HV cables,
but it can also be used for stripping
and chamfering the main insulation
•
The tool runs on rollers around the
cable. No greasing of the cable surface
is needed
•
When peeling the outer semi
conductive
layer,
the
transition
between XLPE insulation and semicon
is very smooth in such a way that
typically no rework with sanding and
polishing is needed. The angle of
the transition is between 6 and 10°.
This provides a perfect t for slip-on
terminations and joints
•
The Series CP comes in three sizes,
CP90, CP130, and CP185, covering
the diameter range between 35 and
185mm
For preparing cables for end terminations
with relatively long lengths to be peeled,
a motorised driving unit is o ered. The
unit can be easily attached and removed
without tools and without having to
remove the tool from the cable.
The tool and the optional drive are of
lightweight design. This makes it suitable
to work with the cable in vertical position
for cable end terminations.
Hivotec AG – Switzerland
Website
:
Hsiang Chuan
Machinery
Stand: 16C63
Hsiang Chuan has been manufacturing
braiding machines for more than 40 years.
The Taiwan company has produced more
than 400 machines. In order to maintain
the quality of the machines, Hsiang Chuan
undertakes everything from research
and development to manufacturing of
machine parts and assembly in Taiwan.
Hsiang Chuan Machinery Co Ltd – China
Website
:
▲
Semicon peeling with the CP130
