Caterpillar Performance Handbook, January 2017, SEBD0351-47

696 / 2440

Edition 47 9-51
Material Handlers
9
Lifting Capacities
● MH3024
(Grenoble Sourced)
Lift Capacities
All values are in lb, bucket cylinder and linkage installed, hydraulic cab riser, work tool: none, with counterweight (11,470 lb), heavy lift on.
Load point height Load over front Load over rear Load over side Load at maximum reach (sticknose/bucket pin)
Undercarriage Boom Stick
MH or Standard One-Piece 8'2"
Undercarriage configuration
10 ft 15 ft 20 ft 25 ft
ft
25 ft
MH – stabilizers up – solid tires *8400 *8400 *8400
19.36
MH – stabilizers down – solid tires *8400 *8400 *8400
Lower (std UC) – f. stabilizer & r. dozer up *8400 *8400 *8400
Lower (std UC) – f. stabilizer & r. dozer down *8400 *8400 *8400
Lower (std UC) – f. dozer & r. stabilizer up *8400 *8400 *8400
Lower (std UC) – f. dozer & r. stabilizer down *8400 *8400 *8400
Lower (std UC) – 2 sets stabilizersup *8400 *8400 *8400
Lower (std UC) – 2 sets stabilizersdown *8400 *8400 *8400
20 ft
MH – stabilizers up – solid tires *14,100 *14,100 10,900 *7400 *7400 *7400
23.46
MH – stabilizers down – solid tires *14,100 *14,100 *14,100 *7400 *7400 *7400
Lower (std UC) – f. stabilizer & r. dozer up *14,100 13,300 10,400 *7400 *7400 *7400
Lower (std UC) – f. stabilizer & r. dozer down *14,100 *14,100 *14,100 *7400 *7400 *7400
Lower (std UC) – f. dozer & r. stabilizer up *14,100 12,900 10,400 *7400 *7400 *7400
Lower (std UC) – f. dozer & r. stabilizer down *14,100 *14,100 *14,100 *7400 *7400 *7400
Lower (std UC) – 2 sets stabilizersup *14,100 13,300 10,500 *7400 *7400 *7400
Lower (std UC) – 2 sets stabilizersdown *14,100 *14,100 *14,100 *7400 *7400 *7400
15 ft
MH – stabilizers up – solid tires 13,900 13,900 10,500 9900 9900 7400 *7100 *7100 7000
25.92
MH – stabilizers down – solid tires *15,100 *15,100 *15,100 *12,100 *12,100 *12,100 *7100 *7100 *7100
Lower (std UC) – f. stabilizer & r. dozer up 13,700 13,000 10,100 9600 9200 7100 *7100 *7100 6700
Lower (std UC) – f. stabilizer & r. dozer down *15,100 *15,100 *15,100 *12,100 *12,100 10,800 *7100 *7100 *7100
Lower (std UC) – f. dozer & r. stabilizer up 14,200 12,600 10,100 10,000 8900 7100 *7100 *7100 6700
Lower (std UC) – f. dozer & r. stabilizer down *15,100 *15,100 *15,100 *12,100 *12,100 11,000 *7100 *7100 *7100
Lower (std UC) – 2 sets stabilizersup 14,100 12,900 10,200 9900 9100 7200 *7100 *7100 6700
Lower (std UC) – 2 sets stabilizersdown *15,100 *15,100 *15,100 *12,100 *12,100 *12,100 *7100 *7100 *7100
10 ft
MH – stabilizers up – solid tires 20,400 20,400 14,900 13,400 13,400 10,000 9700 9700 7200 *7100 *7100 6300
27.23
MH – stabilizers down – solid tires *22,400 *22,400 *22,400 *16,700 *16,700 *16,700 *14,000 *14,000 *14,000 *7100 *7100 *7100
Lower (std UC) – f. stabilizer & r. dozer up 20,300 18,800 14,300 13,200 12,400 9600 9400 9000 6900 *7100 *7100 6000
Lower (std UC) – f. stabilizer & r. dozer down *22,400 *22,400 *22,400 *16,700 *16,700 14,700 *14,000 *14,000 10,500 *7100 *7100 *7100
Lower (std UC) – f. dozer & r. stabilizer up 20,900 18,300 14,300 13,600 12,000 9600 9800 8700 6900 *7100 *7100 6000
Lower (std UC) – f. dozer & r. stabilizer down *22,400 *22,400 *22,400 *16,700 *16,700 15,100 *14,000 *14,000 10,800 *7100 *7100 *7100
Lower (std UC) – 2 sets stabilizersup 20,800 18,800 14,500 13,500 12,400 9700 9700 8900 7000 *7100 *7100 6100
Lower (std UC) – 2 sets stabilizersdown *22,400 *22,400 *22,400 *16,700 *16,700 *16,700 *14,000 *14,000 12,800 *7100 *7100 *7100
5 ft
MH – stabilizers up – solid tires 19,300 19,300 13,900 12,900 12,900 9500 9400 9400 7000 *7400 *7400 6100
27.53
MH – stabilizers down – solid tires *25,400 *25,400 *25,400 *18,200 *18,200 *18,200 *14,500 *14,500 *14,500 *7400 *7400 *7400
Lower (std UC) – f. stabilizer & r. dozer up 19,100 17,800 13,300 12,600 11,900 9100 9200 8700 6700 *7400 *7400 5800
Lower (std UC) – f. stabilizer & r. dozer down *25,400 *25,400 21,600 *18,200 *18,200 14,200 *14,500 *14,500 10,300 *7400 *7400 *7400
Lower (std UC) – f. dozer & r. stabilizer up 19,700 17,200 13,300 13,100 11,500 9100 9500 8400 6700 *7400 7300 5800
Lower (std UC) – f. dozer & r. stabilizer down *25,400 *25,400 22,300 *18,200 *18,200 14,600 *14,500 *14,500 10,500 *7400 *7400 *7400
Lower (std UC) – 2 sets stabilizersup 19,600 17,700 13,500 13,000 11,900 9200 9500 8700 6800 *7400 *7400 5900
Lower (std UC) – 2 sets stabilizersdown *25,400 *25,400 *25,400 *18,200 *18,200 17,400 *14,500 *14,500 12,500 *7400 *7400 *7400
0 ft
MH – stabilizers up – solid tires 18,800 18,800 13,500 12,500 12,500 9200 9200 9200 6800 *8100 *8100 6200
26.84
MH – stabilizers down – solid tires *25,700 *25,700 *25,700 *18,700 *18,700 *18,700 *14,400 *14,400 *14,400 *8100 *8100 *8100
Lower (std UC) – f. stabilizer & r. dozer up 18,600 17,300 12,900 12,300 11,600 8800 9000 8600 6500 *8100 7800 5900
Lower (std UC) – f. stabilizer & r. dozer down *25,700 *25,700 21,100 *18,700 *18,700 13,800 *14,400 *14,400 10,100 *8100 *8100 *8100
Lower (std UC) – f. dozer & r. stabilizer up 19,200 16,700 12,900 12,700 11,200 8800 9300 8200 6500 *8100 7500 5900
Lower (std UC) – f. dozer & r. stabilizer down *25,700 *25,700 21,800 *18,700 *18,700 14,200 *14,400 *14,400 10,400 *8100 *8100 *8100
Lower (std UC) – 2 sets stabilizersup 19,100 17,200 13,000 12,600 11,500 8900 9300 8500 6600 *8100 7700 6000
Lower (std UC) – 2 sets stabilizersdown *25,700 *25,700 *25,700 *18,700 *18,700 17,000 *14,400 *14,400 12,300 *8100 *8100 *8100
–5 ft
MH – stabilizers up – solid tires *22,200 *22,200 *22,200 18,700 18,700 13,400 12,400 12,400 9100 9200 9200 6800 9200 9200 6800
25.13
MH – stabilizers down – solid tires *22,200 *22,200 *22,200 *23,800 *23,800 *23,800 *17,700 *17,700 *17,700 *11,300 *11,300 *11,300 *9500 *9500 *9500
Lower (std UC) – f. stabilizer & r. dozer up *22,200 *22,200 *22,200 18,500 17,200 12,800 12,200 11,500 8700 9000 8500 6500 8900 8500 6500
Lower (std UC) – f. stabilizer & r. dozer down *22,200 *22,200 *22,200 *23,800 *23,800 21,000 *17,700 *17,700 13,700 *11,300 *11,300 10,100 *9500 *9500 *9500
Lower (std UC) – f. dozer & r. stabilizer up *22,200 *22,200 *22,200 19,100 16,600 12,800 12,600 11,100 8700 9300 8200 6500 9300 8200 6500
Lower (std UC) – f. dozer & r. stabilizer down *22,200 *22,200 *22,200 *23,800 *23,800 21,700 *17,700 *17,700 14,100 *11,300 *11,300 10,400 *9500 *9500 *9500
Lower (std UC) – 2 sets stabilizersup *22,200 *22,200 *22,200 19,000 17,100 12,900 12,500 11,400 8800 9300 8500 6600 9200 8400 6500
Lower (std UC) – 2 sets stabilizersdown *22,200 *22,200 *22,200 *23,800 *23,800 *23,800 *17,700 *17,700 16,900 *11,300 *11,300 *11,300 *9500 *9500 *9500
–10 ft
MH – stabilizers up – solid tires *25,700 *25,700 25,100 18,900 18,900 13,600 12,500 12,500 9200 11,000 11,000 8200
22.15
MH – stabilizers down – solid tires *25,700 *25,700 *25,700 *19,800 *19,800 *19,800 *14,500 *14,500 *14,500 *11,800 *11,800 *11,800
Lower (std UC) – f. stabilizer & r. dozer up *25,700 *25,700 24,000 18,700 17,400 13,000 12,300 11,600 8800 10,800 10,200 7800
Lower (std UC) – f. stabilizer & r. dozer down *25,700 *25,700 *25,700 *19,800 *19,800 *19,800 *14,500 *14,500 13,800 *11,800 *11,800 *11,800
Lower (std UC) – f. dozer & r. stabilizer up *25,700 *25,700 24,000 19,300 16,800 13,000 12,700 11,200 8800 11,200 9800 7800
Lower (std UC) – f. dozer & r. stabilizer down *25,700 *25,700 *25,700 *19,800 *19,800 *19,800 *14,500 *14,500 14,200 *11,800 *11,800 *11,800
Lower (std UC) – 2 sets stabilizersup *25,700 *25,700 24,300 19,200 17,300 13,100 12,600 11,500 8900 11,100 10,200 7900
Lower (std UC) – 2 sets stabilizersdown *25,700 *25,700 *25,700 *19,800 *19,800 *19,800 *14,500 *14,500 *14,500 *11,800 *11,800 *11,800
*Limited by hydraulic rather than tipping load.
Lift capacity ratings are based on ISO 10567:2007, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. The load point is the center line of the bucket pivot mounting pin on the stick. The oscillating
axle must be locked. Lifting capacities are based on the machine standing on a firm uniform supporting surface. For lifting capacity including bucket and/or quick coupler, the respective weight has to be subtracted from
above values. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.
Always refer to the appropriate Operation and Maintenance Manual for specific product information.