Caterpillar Performance Handbook, January 2017, SEBD0351-47

698 / 2440

Edition 47 9-53
Material Handlers
9
Lifting Capacities
● MH3024
(Grenoble Sourced)
Lift Capacities
All values are in lb, bucket cylinder and linkage installed, hydraulic cab riser, work tool: none, with counterweight (9040 lb), heavy lift on.
Load point height Load over front Load over rear Load over side Load at maximum reach (sticknose/bucket pin)
Undercarriage Boom Stick
MH or Standard One-Piece 9'6"
Undercarriage configuration
10 ft 15 ft 20 ft 25 ft
ft
25 ft
MH – stabilizers up – solid tires *6900 *6900 *6900
21.13
MH – stabilizers down – solid tires *6900 *6900 *6900
Lower (std UC) – f. stabilizer & r. dozer up *6900 *6900 *6900
Lower (std UC) – f. stabilizer & r. dozer down *6900 *6900 *6900
Lower (std UC) – f. dozer & r. stabilizer up *6900 *6900 *6900
Lower (std UC) – f. dozer & r. stabilizer down *6900 *6900 *6900
Lower (std UC) – 2 sets stabilizersup *6900 *6900 *6900
Lower (std UC) – 2 sets stabilizersdown *6900 *6900 *6900
20 ft
MH – stabilizers up – solid tires *6100 *6100 *6100
24.93
MH – stabilizers down – solid tires *6100 *6100 *6100
Lower (std UC) – f. stabilizer & r. dozer up *6100 *6100 *6100
Lower (std UC) – f. stabilizer & r. dozer down *6100 *6100 *6100
Lower (std UC) – f. dozer & r. stabilizer up *6100 *6100 *6100
Lower (std UC) – f. dozer & r. stabilizer down *6100 *6100 *6100
Lower (std UC) – 2 sets stabilizersup *6100 *6100 *6100
Lower (std UC) – 2 sets stabilizersdown *6100 *6100 *6100
15 ft
MH – stabilizers up – solid tires 12,500 12,500 9300 8800 8800 6500 *5900 *5900 5500
27.26
MH – stabilizers down – solid tires *14,300 *14,300 *14,300 *12,800 *12,800 *12,800 *5900 *5900 *5900
Lower (std UC) – f. stabilizer & r. dozer up 12,300 11,600 8900 8500 8100 6200 *5900 *5900 5200
Lower (std UC) – f. stabilizer & r. dozer down *14,300 *14,300 13,800 *12,800 *12,800 9600 *5900 *5900 *5900
Lower (std UC) – f. dozer & r. stabilizer up 12,700 11,200 8900 8900 7800 6200 *5900 *5900 5200
Lower (std UC) – f. dozer & r. stabilizer down *14,300 *14,300 14,200 *12,800 *12,800 9800 *5900 *5900 *5900
Lower (std UC) – 2 sets stabilizersup 12,600 11,600 9000 8800 8100 6200 *5900 *5900 5300
Lower (std UC) – 2 sets stabilizersdown *14,300 *14,300 *14,300 *12,800 *12,800 11,700 *5900 *5900 *5900
10 ft
MH – stabilizers up – solid tires 18,400 18,400 13,300 12,000 12,000 8800 8500 8500 6300 *5900 *5900 5000
28.51
MH – stabilizers down – solid tires *21,200 *21,200 *21,200 *16,000 *16,000 *16,000 *13,500 *13,500 *13,500 *5900 *5900 *5900
Lower (std UC) – f. stabilizer & r. dozer up 18,200 17,000 12,700 11,700 11,100 8400 8300 7900 5900 *5900 *5900 4700
Lower (std UC) – f. stabilizer & r. dozer down *21,200 *21,200 20,600 *16,000 *16,000 13,200 *13,500 *13,500 9300 *5900 *5900 *5900
Lower (std UC) – f. dozer & r. stabilizer up 18,800 16,400 12,700 12,100 10,700 8400 8600 7600 5900 *5900 *5900 4700
Lower (std UC) – f. dozer & r. stabilizer down *21,200 *21,200 *21,200 *16,000 *16,000 13,600 *13,500 *13,500 9600 *5900 *5900 *5900
Lower (std UC) – 2 sets stabilizersup 18,700 16,900 12,800 12,000 11,000 8500 8500 7800 6000 *5900 *5900 4800
Lower (std UC) – 2 sets stabilizersdown *21,200 *21,200 *21,200 *16,000 *16,000 *16,000 *13,500 *13,500 11,500 *5900 *5900 *5900
5 ft
MH – stabilizers up – solid tires 17,200 17,200 12,200 11,400 11,400 8300 8200 8200 6000 *6100 *6100 4800
28.77
MH – stabilizers down – solid tires *24,600 *24,600 *24,600 *17,700 *17,700 *17,700 *14,200 *14,200 13,400 *6100 *6100 *6100
Lower (std UC) – f. stabilizer & r. dozer up 16,900 15,800 11,600 11,100 10,500 7800 8000 7600 5700 *6100 *6100 4500
Lower (std UC) – f. stabilizer & r. dozer down *24,600 *24,600 19,300 *17,700 *17,700 12,600 *14,200 *14,200 9100 *6100 *6100 *6100
Lower (std UC) – f. dozer & r. stabilizer up 17,600 15,200 11,600 11,500 10,100 7800 8300 7300 5700 *6100 5900 4500
Lower (std UC) – f. dozer & r. stabilizer down *24,600 *24,600 20,000 *17,700 *17,700 12,900 *14,200 13,500 9300 *6100 *6100 *6100
Lower (std UC) – 2 sets stabilizersup 17,400 15,700 11,700 11,500 10,400 7900 8300 7600 5700 *6100 6100 4600
Lower (std UC) – 2 sets stabilizersdown *24,600 *24,600 *24,600 *17,700 *17,700 15,600 *14,200 14,000 11,200 *6100 *6100 *6100
0 ft
MH – stabilizers up – solid tires 16,500 16,500 11,600 11,000 11,000 7900 8000 8000 5800 *6700 *6700 4900
28.15
MH – stabilizers down – solid tires *25,700 *25,700 *25,700 *18,500 *18,500 18,500 *14,400 *14,400 13,200 *6700 *6700 *6700
Lower (std UC) – f. stabilizer & r. dozer up 16,300 15,100 11,000 10,700 10,100 7400 7800 7400 5500 6600 6300 4600
Lower (std UC) – f. stabilizer & r. dozer down *25,700 *25,700 18,600 *18,500 *18,500 12,100 *14,400 *14,400 8800 *6700 *6700 *6700
Lower (std UC) – f. dozer & r. stabilizer up 16,900 14,500 11,000 11,100 9700 7400 8100 7100 5500 *6700 6000 4600
Lower (std UC) – f. dozer & r. stabilizer down *25,700 *25,700 19,300 *18,500 *18,500 12,500 *14,400 13,300 9100 *6700 *6700 *6700
Lower (std UC) – 2 sets stabilizersup 16,800 15,000 11,100 11,000 10,000 7500 8000 7300 5500 *6700 6200 4700
Lower (std UC) – 2 sets stabilizersdown *25,700 *25,700 23,900 *18,500 *18,500 15,200 *14,400 13,700 10,900 *6700 *6700 *6700
–5 ft
MH – stabilizers up – solid tires *21,000 *21,000 *21,000 16,400 16,400 11,400 10,800 10,800 7700 7900 7900 5700 7400 7400 5300
26.51
MH – stabilizers down – solid tires *21,000 *21,000 *21,000 *24,400 *24,400 *24,400 *18,000 *18,000 *18,000 *13,500 *13,500 13,100 *7700 *7700 *7700
Lower (std UC) – f. stabilizer & r. dozer up *21,000 *21,000 20,000 16,100 14,900 10,800 10,500 9900 7300 7700 7300 5400 7100 6800 5000
Lower (std UC) – f. stabilizer & r. dozer down *21,000 *21,000 *21,000 *24,400 *24,400 18,400 *18,000 *18,000 12,000 *13,500 *13,500 8700 *7700 *7700 *7700
Lower (std UC) – f. dozer & r. stabilizer up *21,000 *21,000 20,000 16,700 14,300 10,800 10,900 9500 7300 8000 7000 5400 7400 6500 5000
Lower (std UC) – f. dozer & r. stabilizer down *21,000 *21,000 *21,000 *24,400 *24,400 19,100 *18,000 *18,000 12,300 *13,500 13,200 9000 *7700 *7700 *7700
Lower (std UC) – 2 sets stabilizersup *21,000 *21,000 20,300 16,600 14,800 10,900 10,800 9800 7400 8000 7300 5500 7400 6700 5100
Lower (std UC) – 2 sets stabilizersdown *21,000 *21,000 *21,000 *24,400 *24,400 23,700 *18,000 *18,000 15,000 *13,500 *13,500 10,800 *7700 *7700 *7700
–10 ft
MH – stabilizers up – solid tires *28,600 *28,600 21,500 16,500 16,500 11,500 10,800 10,800 7700 8700 8700 6300
23.69
MH – stabilizers down – solid tires *28,600 *28,600 *28,600 *21,100 *21,100 *21,100 *15,600 *15,600 *15,600 *9700 *9700 *9700
Lower (std UC) – f. stabilizer & r. dozer up *28,600 *28,600 20,400 16,200 15,100 10,900 10,600 10,000 7300 8400 8000 5900
Lower (std UC) – f. stabilizer & r. dozer down *28,600 *28,600 *28,600 *21,100 *21,100 18,500 *15,600 *15,600 12,000 *9700 *9700 9600
Lower (std UC) – f. dozer & r. stabilizer up *28,600 28,300 20,400 16,800 14,500 10,900 11,000 9600 7300 8800 7700 5900
Lower (std UC) – f. dozer & r. stabilizer down *28,600 *28,600 *28,600 *21,100 *21,100 19,200 *15,600 *15,600 12,400 *9700 *9700 *9700
Lower (std UC) – 2 sets stabilizersup *28,600 *28,600 20,600 16,700 15,000 11,100 10,900 9900 7400 8700 8000 6000
Lower (std UC) – 2 sets stabilizersdown *28,600 *28,600 *28,600 *21,100 *21,100 *21,100 *15,600 *15,600 15,000 *9700 *9700 *9700
–15 ft
MH – stabilizers up – solid tires *14,500 *14,500 12,000
MH – stabilizers down – solid tires *14,500 *14,500 *14,500
Lower (std UC) – f. stabilizer & r. dozer up *14,500 *14,500 11,400
Lower (std UC) – f. stabilizer & r. dozer down *14,500 *14,500 *14,500
Lower (std UC) – f. dozer & r. stabilizer up *14,500 *14,500 11,400
Lower (std UC) – f. dozer & r. stabilizer down *14,500 *14,500 *14,500
Lower (std UC) – 2 sets stabilizersup *14,500 *14,500 11,500
Lower (std UC) – 2 sets stabilizersdown *14,500 *14,500 *14,500
*Limited by hydraulic rather than tipping load.
Lift capacity ratings are based on ISO 10567:2007, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. The load point is the center line of the bucket pivot mounting pin on the stick. The oscillating
axle must be locked. Lifting capacities are based on the machine standing on a firm uniform supporting surface. For lifting capacity including bucket and/or quick coupler, the respective weight has to be subtracted from
above values. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.
Always refer to the appropriate Operation and Maintenance Manual for specific product information.