Caterpillar Performance Handbook, January 2017, SEBD0351-47

700 / 2440

Edition 47 9-55
Material Handlers
9
Lifting Capacities
● MH3024
(Grenoble Sourced)
Lift Capacities
All values are in lb, bucket cylinder and linkage installed, hydraulic cab riser, work tool: none, with counterweight (11,470 lb), heavy lift on.
Load point height Load over front Load over rear Load over side Load at maximum reach (sticknose/bucket pin)
Undercarriage Boom Stick
MH or Standard One-Piece 9'6"
Undercarriage configuration
10 ft 15 ft 20 ft 25 ft
ft
25 ft
MH – stabilizers up – solid tires *6900 *6900 *6900
21.13
MH – stabilizers down – solid tires *6900 *6900 *6900
Lower (std UC) – f. stabilizer & r. dozer up *6900 *6900 *6900
Lower (std UC) – f. stabilizer & r. dozer down *6900 *6900 *6900
Lower (std UC) – f. dozer & r. stabilizer up *6900 *6900 *6900
Lower (std UC) – f. dozer & r. stabilizer down *6900 *6900 *6900
Lower (std UC) – 2 sets stabilizersup *6900 *6900 *6900
Lower (std UC) – 2 sets stabilizersdown *6900 *6900 *6900
20 ft
MH – stabilizers up – solid tires *6100 *6100 *6100
24.93
MH – stabilizers down – solid tires *6100 *6100 *6100
Lower (std UC) – f. stabilizer & r. dozer up *6100 *6100 *6100
Lower (std UC) – f. stabilizer & r. dozer down *6100 *6100 *6100
Lower (std UC) – f. dozer & r. stabilizer up *6100 *6100 *6100
Lower (std UC) – f. dozer & r. stabilizer down *6100 *6100 *6100
Lower (std UC) – 2 sets stabilizersup *6100 *6100 *6100
Lower (std UC) – 2 sets stabilizersdown *6100 *6100 *6100
15 ft
MH – stabilizers up – solid tires 14,000 14,000 10,600 9900 9900 7500 *5900 *5900 *5900
27.26
MH – stabilizers down – solid tires *14,300 *14,300 *14,300 *12,800 *12,800 *12,800 *5900 *5900 *5900
Lower (std UC) – f. stabilizer & r. dozer up 13,800 13,100 10,200 9700 9200 7100 *5900 *5900 *5900
Lower (std UC) – f. stabilizer & r. dozer down *14,300 *14,300 *14,300 *12,800 *12,800 10,800 *5900 *5900 *5900
Lower (std UC) – f. dozer & r. stabilizer up 14,200 12,700 10,200 10,000 8900 7100 *5900 *5900 *5900
Lower (std UC) – f. dozer & r. stabilizer down *14,300 *14,300 *14,300 *12,800 *12,800 11,100 *5900 *5900 *5900
Lower (std UC) – 2 sets stabilizersup 14,200 13,000 10,300 10,000 9200 7200 *5900 *5900 *5900
Lower (std UC) – 2 sets stabilizersdown *14,300 *14,300 *14,300 *12,800 *12,800 *12,800 *5900 *5900 *5900
10 ft
MH – stabilizers up – solid tires 20,600 20,600 15,100 13,500 13,500 10,100 9700 9700 7200 *5900 *5900 5900
28.51
MH – stabilizers down – solid tires *21,200 *21,200 *21,200 *16,000 *16,000 *16,000 *13,500 *13,500 *13,500 *5900 *5900 *5900
Lower (std UC) – f. stabilizer & r. dozer up 20,500 19,100 14,500 13,200 12,500 9700 9400 9000 6900 *5900 *5900 5600
Lower (std UC) – f. stabilizer & r. dozer down *21,200 *21,200 *21,200 *16,000 *16,000 14,800 *13,500 *13,500 10,500 *5900 *5900 *5900
Lower (std UC) – f. dozer & r. stabilizer up 21,100 18,500 14,500 13,700 12,100 9700 9800 8700 6900 *5900 *5900 5600
Lower (std UC) – f. dozer & r. stabilizer down *21,200 *21,200 *21,200 *16,000 *16,000 15,200 *13,500 *13,500 10,800 *5900 *5900 *5900
Lower (std UC) – 2 sets stabilizersup 21,000 19,000 14,700 13,600 12,400 9800 9700 8900 7000 *5900 *5900 5600
Lower (std UC) – 2 sets stabilizersdown *21,200 *21,200 *21,200 *16,000 *16,000 *16,000 *13,500 *13,500 12,800 *5900 *5900 *5900
5 ft
MH – stabilizers up – solid tires 19,400 19,400 14,000 12,900 12,900 9500 9400 9400 7000 *6100 *6100 5600
28.77
MH – stabilizers down – solid tires *24,600 *24,600 *24,600 *17,700 *17,700 *17,700 *14,200 *14,200 *14,200 *6100 *6100 *6100
Lower (std UC) – f. stabilizer & r. dozer up 19,200 17,900 13,400 12,600 11,900 9100 9200 8700 6600 *6100 *6100 5400
Lower (std UC) – f. stabilizer & r. dozer down *24,600 *24,600 21,700 *17,700 *17,700 14,200 *14,200 *14,200 10,300 *6100 *6100 *6100
Lower (std UC) – f. dozer & r. stabilizer up 19,800 17,300 13,400 13,100 11,500 9100 9500 8400 6600 *6100 *6100 5400
Lower (std UC) – f. dozer & r. stabilizer down *24,600 *24,600 22,400 *17,700 *17,700 14,600 *14,200 *14,200 10,500 *6100 *6100 *6100
Lower (std UC) – 2 sets stabilizersup 19,700 17,800 13,500 13,000 11,900 9200 9400 8600 6700 *6100 *6100 5400
Lower (std UC) – 2 sets stabilizersdown *24,600 *24,600 *24,600 *17,700 *17,700 17,400 *14,200 *14,200 12,500 *6100 *6100 *6100
0 ft
MH – stabilizers up – solid tires 18,700 18,700 13,400 12,500 12,500 9100 9100 9100 6800 *6700 *6700 5700
28.15
MH – stabilizers down – solid tires *25,700 *25,700 *25,700 *18,500 *18,500 *18,500 *14,400 *14,400 *14,400 *6700 *6700 *6700
Lower (std UC) – f. stabilizer & r. dozer up 18,500 17,200 12,800 12,200 11,500 8700 8900 8500 6400 *6700 *6700 5500
Lower (std UC) – f. stabilizer & r. dozer down *25,700 *25,700 21,000 *18,500 *18,500 13,700 *14,400 *14,400 10,000 *6700 *6700 *6700
Lower (std UC) – f. dozer & r. stabilizer up 19,200 16,600 12,800 12,600 11,100 8700 9200 8200 6400 *6700 *6700 5500
Lower (std UC) – f. dozer & r. stabilizer down *25,700 *25,700 21,700 *18,500 *18,500 14,100 *14,400 *14,400 10,300 *6700 *6700 *6700
Lower (std UC) – 2 sets stabilizersup 19,100 17,100 12,900 12,600 11,500 8800 9200 8400 6500 *6700 *6700 5500
Lower (std UC) – 2 sets stabilizersdown *25,700 *25,700 *25,700 *18,500 *18,500 17,000 *14,400 *14,400 12,300 *6700 *6700 *6700
–5 ft
MH – stabilizers up – solid tires *21,000 *21,000 *21,000 18,500 18,500 13,200 12,300 12,300 9000 9100 9100 6700 *7700 *7700 6200
26.51
MH – stabilizers down – solid tires *21,000 *21,000 *21,000 *24,400 *24,400 *24,400 *18,000 *18,000 *18,000 *13,500 *13,500 *13,500 *7700 *7700 *7700
Lower (std UC) – f. stabilizer & r. dozer up *21,000 *21,000 *21,000 18,300 17,000 12,600 12,000 11,300 8500 8900 8400 6400 *7700 *7700 5900
Lower (std UC) – f. stabilizer & r. dozer down *21,000 *21,000 *21,000 *24,400 *24,400 20,800 *18,000 *18,000 13,600 *13,500 *13,500 9900 *7700 *7700 *7700
Lower (std UC) – f. dozer & r. stabilizer up *21,000 *21,000 *21,000 19,000 16,400 12,600 12,500 10,900 8500 9200 8100 6400 *7700 7500 5900
Lower (std UC) – f. dozer & r. stabilizer down *21,000 *21,000 *21,000 *24,400 *24,400 21,500 *18,000 *18,000 13,900 *13,500 *13,500 10,200 *7700 *7700 *7700
Lower (std UC) – 2 sets stabilizersup *21,000 *21,000 *21,000 18,900 16,900 12,800 12,400 11,300 8600 9100 8300 6400 *7700 *7700 6000
Lower (std UC) – 2 sets stabilizersdown *21,000 *21,000 *21,000 *24,400 *24,400 *24,400 *18,000 *18,000 16,800 *13,500 *13,500 12,200 *7700 *7700 *7700
–10 ft
MH – stabilizers up – solid tires *28,600 *28,600 24,700 18,700 18,700 13,400 12,300 12,300 9000 *9700 *9700 7300
23.69
MH – stabilizers down – solid tires *28,600 *28,600 *28,600 *21,100 *21,100 *21,100 *15,600 *15,600 *15,600 *9700 *9700 *9700
Lower (std UC) – f. stabilizer & r. dozer up *28,600 *28,600 23,600 18,500 17,200 12,700 12,100 11,400 8600 9700 9200 7000
Lower (std UC) – f. stabilizer & r. dozer down *28,600 *28,600 *28,600 *21,100 *21,100 20,900 *15,600 *15,600 13,600 *9700 *9700 *9700
Lower (std UC) – f. dozer & r. stabilizer up *28,600 *28,600 23,600 19,100 16,600 12,700 12,500 11,000 8600 *9700 8800 7000
Lower (std UC) – f. dozer & r. stabilizer down *28,600 *28,600 *28,600 *21,100 *21,100 *21,100 *15,600 *15,600 14,000 *9700 *9700 *9700
Lower (std UC) – 2 sets stabilizersup *28,600 *28,600 23,900 19,000 17,100 12,900 12,400 11,300 8700 *9700 9100 7000
Lower (std UC) – 2 sets stabilizersdown *28,600 *28,600 *28,600 *21,100 *21,100 *21,100 *15,600 *15,600 *15,600 *9700 *9700 *9700
–15 ft
MH – stabilizers up – solid tires *14,500 *14,500 13,800
MH – stabilizers down – solid tires *14,500 *14,500 *14,500
Lower (std UC) – f. stabilizer & r. dozer up *14,500 *14,500 13,200
Lower (std UC) – f. stabilizer & r. dozer down *14,500 *14,500 *14,500
Lower (std UC) – f. dozer & r. stabilizer up *14,500 *14,500 13,200
Lower (std UC) – f. dozer & r. stabilizer down *14,500 *14,500 *14,500
Lower (std UC) – 2 sets stabilizersup *14,500 *14,500 13,300
Lower (std UC) – 2 sets stabilizersdown *14,500 *14,500 *14,500
*Limited by hydraulic rather than tipping load.
Lift capacity ratings are based on ISO 10567:2007, they do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. The load point is the center line of the bucket pivot mounting pin on the stick. The oscillating
axle must be locked. Lifting capacities are based on the machine standing on a firm uniform supporting surface. For lifting capacity including bucket and/or quick coupler, the respective weight has to be subtracted from
above values. The use of a work tool attachment point to handle/lift objects, could affect the machine lift performance.
Always refer to the appropriate Operation and Maintenance Manual for specific product information.