Background Image
Table of Contents Table of Contents
Previous Page  145 / 216 Next Page
Information
Show Menu
Previous Page 145 / 216 Next Page
Page Background

wire

2016

show

4-8 April

➣➢➣

March 2016

143

www.read-eurowire.com

The diameter measuring range of the DM

1 is 0.01mm to 12mm. Since it uses image

processing principles, the object under

test is always displayed on the computer

monitor. This avoids faulty measurement

because of dust particles, since they can

be seen during the measurement.

The measuring accuracy is 0.2 micron

to 2 micron, depending on bore or wire

diameter. For lower accuracy demands

OEG o ers the low cost measuring and

inspection system DIM for diameter and

roundness of the bore of wire drawing

dies.

Additionally to the diameter gauges,

OEG is introducing the new measuring

system DG 1 for the measurement of the

reduction cone angle of drawing dies. The

DG 1 also has the measuring capability

for diameter and roundness of drawing

and enamelling dies with the same

speci cation as the DM 1.

The product line is completed by a

drawing die inspection system, specially

designed for this application.

OEG GmbH – Germany

Website

:

www.oeggmbh.com

Otto Bihler

Stand: 10F12

The new servo-controlled stamping and

forming machine RM-NC is designed for a

highly e cient manufacture of stamped

and formed parts in small and medium

batch sizes. It permits a fast, requirements-

focused response to customer demands.

Very fast, 100 per cent reproducible

setup and retooling operations are the

strengths of the system. Combining

servo

technology

with

the

latest

control technology, the result is fast,

reliable production, while the use of the

VariControl VC 1 machine and process

controller means that the system is

extremely easy to program and operate.

With the powerful machine, production

cycles of up to 300/minute can be realised.

The costs for new tools are signi cantly

reduced and existing tools from the

RM series can be easily integrated and

optimised for use on the NC machine.

The DM 1 fromOEG

Servo-controlled stamping and forming machine

RM-NC. Photograph courtesy of Bihler