EuroWire May 2015

78 / 116

wire Russia 2015
May 2015 76 wire Russia – Krasnaya Presnya Expo fairgrounds, Moscow, Russia 12th-15th May 2015
➢➣➢
Decalub green cleaning
TecHnOlOgieS FOcuS On:
DECALUB
31, avenue de Condé
77500 CHELLES, FRANCE
E-mail:
Website:
Wire Cleaning
( for plating and high glossy finish )
Wire Rod Lubrication
( for frictionless drawing )
Rod Dry Preparation
( with no speed limit )
Providing a separate transformer just for
the supply of the welding machine is not
only expensive, but also approaches the
limits of what is physically possible.
Type MK 1200 has a nominal capacity of
1200 KVA - with a 3-phase direct current
transformer. This drastically reduces the
current required, nearly cutting it in half.
In a conventional transformer, the mains
voltage is reduced (eg from 460V to
15V). Two phases of a three-phase mains
network are loaded (both phases AC =
alternating current). In a three-phase
transformer, the input voltage is also
reduced to 15V, but at the same time, the
alternating current is converted to direct
current. The transformer is connected to
all three phases of the mains supply.
The biggest advantages are:
• Lower current load for each individual
phase
• Balanced load for all three phases
• Higher capacity/higher secondary
voltage
August Strecker GmbH & Co KG –
Germany
Website:
Troester GmbH
Stand FOD33
Troester GmbH & Co KG is a worldwide
manufacturer of complete extrusion
systems for the cable industry.
The company will present its technology
and solutions in the eld of:
• Rubber CV and CCV-lines up to 35kV
• XLPE CCV and VCV lines for power
cables up to 500kV
• Sheathing lines for medium and high
voltage cables
• Silane lines for LV and MV cables
X-Compound, the new company of
the Troester Group, will join the booth
and present its kneader technology for
the continuous compounding of HFFR
(LSOH), PVC, XLPE, semiconductive
materials and EPR/EPDM. X-Compound
is specialised in the planning and
construction of complete systems for the
compounding of plastics with the process
steps conveying, melting, dispersing,
mixing and degassing.
Troester GmbH & Co KG – Germany
Website:
WiTechs GmbH
Stand FOD45
WiTechs has developed over the last two
years a new system for endless sanding
of wire.
The priority was the development of a
system which would be able to produce
defect-free wire rod surfaces, for
example for spring steel applications.
Due to the special design the machine
also allows high-speed sanding of up
to 6m/s inlet speed, for example in front
of single- or double-block drawing
machines. The innovation lies in the sand
belt guidance which is in the longitudinal
direction. A sanding surface pattern is
built in the wire direction.
This system complements the in-house
developed yer-grinding technology
which has existed for several years. That
technology works by means of three
sand-belt rolls on a common yer disc
that is continuously rotating around the
wire rod.
The new so-called longitudinal sanding
machine SEZ 8-150 was presented during
▼ Extruder and kneader from the Troester Group ▲ Longitudinal sanding machine